Page 171 / 300 Scroll up to view Page 166 - 170
Chapter 18 Wireless LAN
P-663HN-51 User’s Guide
171
3
Enter the ZyXEL Device’s identification PIN and click
Next
. The computer tells the
ZyXEL Device what wireless network settings to use.
18.10.5.2
Vista Adding and Authenticating Wireless Clients
After a Windows Vista computer configures the ZyXEL Device’s wireless settings,
the same computer can use WPS to add wireless clients to the network. The
computer also authenticates them when they connect to the wireless network.
1
In the wireless client’s configuration utility, select the option to use its PIN to add
it to the wireless network.
Note: After the wireless client starts WPS configuration, you have two minutes to
enter the PIN in the Windows Vista computer.
2
In the Windows Vista network connections, an icon for the wireless client displays.
Double-click it, enter the wireless client’s PIN, and click
Next
.
3
The Windows Vista computer uses WPS to give the wireless client the wireless
network’s settings. After the wireless client’s wireless settings are configured, the
Windows Vista computer authenticates them whenever they connect to the
wireless network.
4
After the WPS process finishes (the enrollee is able to access the ZyXEL Device)
you can repeat these steps to add more wireless clients one at a time.
Page 172 / 300
Chapter 18 Wireless LAN
P-663HN-51 User’s Guide
172
Page 173 / 300
173
P
ART
III
Diagnostics and
Management
Diagnostics
(175)
Settings
(177)
Logs
(181)
SNMP
(185)
Time
(191)
Access Control
(193)
Update Software
(199)
Save/Reboot and Logout
(201)
Page 174 / 300
174
Page 175 / 300
P-663HN-51 User’s Guide
175
C
HAPTER
19
Diagnostics
These read-only screens display information to help you identify problems with the
ZyXEL Device.
19.1
Diagnostics
Click
Diagnostics
to open the screen shown next. Use this screen to test the
ZyXEL Devices connections. The ENET connections appear as four separate
connections when you enable virtual ports (see
Chapter 16 on page 129
),
otherwise they appear as a single connection. If you are using single line mode,
DSL2
must be connected and working to pass the ADSL synchronization test. If
you are not using single line mode, the ADSL synchronization test can be passed if
either DSL line is connected and working.
Figure 85
Diagnostics

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top