Page 181 / 300 Scroll up to view Page 176 - 180
P-663HN-51 User’s Guide
181
C
HAPTER
21
Logs
This chapter contains information about configuring general log settings and
viewing the ZyXEL Device’s logs. Refer to the appendix for example log message
explanations.
21.1
Logs Overview
The web configurator allows you to choose which levels of events to have the
ZyXEL Device log and then display the logs or have the ZyXEL Device send them
to an administrator (as e-mail) or to a syslog server.
21.2
System Log
Click
Management > System Log
to open the following screen. Click
View
System Log
screen to see the logs, or
Configure System Log
to configure the
logging settings.
Figure 90
Management > System Log
Page 182 / 300
Chapter 21 Logs
P-663HN-51 User’s Guide
182
21.3
Viewing the System Log
Click
Management > System Log
>
View System Log
to view the ZyXEL
Device’s system logs.
Figure 91
Management > System Log > View System Log
The following table describes the fields in this screen.
Table 63
Management > System Log > View System Log
LABEL
DESCRIPTION
Date/Time
This field displays when the log was recorded.
Facility
This is the log’s category.
Severity
This is the event’s degree of seriousness.
Message
This field states the reason for the log.
Refresh
Click
Refresh
to renew the log screen.
Close
Click this to close the window.
Page 183 / 300
Chapter 21 Logs
P-663HN-51 User’s Guide
183
21.4
Configuring Log Settings
Click
Management > System Log
>
Configure System Log
to display the
following screen. Use this screen to configure the level of events to log and where
to send logs.
Figure 92
Management > System Log > Configure System Log
The following table describes the fields in this screen.
Table 64
Management > System Log > Configure System Log
LABEL
DESCRIPTION
Log
This controls whether or not the ZyXEL Device logs events.
Log Level
Select the lowest level of events that you want the ZyXEL Device to log.
The ZyXEL Device logs all events with that severity level or higher.
Display Level
Select the lowest level of events that you want the ZyXEL Device to
display. The ZyXEL Device displays events with that severity level or
higher.
Mode
Select
Local
to only record events in the ZyXEL Device’s memory. Select
Remote
to send events to a remote syslog server. Select
Both
to record
events in the ZyXEL Device’s memory and send them to a remote syslog
server.
Server IP
Address
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Server UDP
Port
Enter the UDP port number the ZyXEL Device is to use when sending
syslog events to the syslog server.
Save/Apply
Click this button to save the changes and have the ZyXEL Device start
using them.
Page 184 / 300
Chapter 21 Logs
P-663HN-51 User’s Guide
184
Page 185 / 300
P-663HN-51 User’s Guide
185
C
HAPTER
22
SNMP
22.1
SNMP Overview
Simple Network Management Protocol is a protocol used for exchanging
management information between network devices. SNMP is a member of TCP/IP
protocol suite. A manager station can monitor the ZyXEL Device through the
network via SNMP version one (SNMPv1) and/or SNMP version 2c. The next figure
illustrates an SNMP management operation. SNMP is only available if TCP/IP is
configured.
Figure 93
SNMP Management Model
An SNMP managed network consists of two main components: agents and a
manager.
An agent is a management software module that resides in a managed device (the
ZyXEL Device). An agent translates the local management information from the
managed device into a form compatible with SNMP. The manager is the console

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top