Page 176 / 300
Scroll up to view Page 171 - 175
Chapter 19 Diagnostics
P-663HN-51 User’s Guide
176
Page 177 / 300
P-663HN-51 User’s Guide
177
C
HAPTER
20
Settings
This chapter describes how to manage your ZyXEL Device’s configuration.
20.1
Backup Configuration Using the Web
Configurator
Click
Management > Settings > Backup
to open the following screen. Use this
screen to back up (save) the ZyXEL Device’s current configuration to a file on your
computer. Once your ZyXEL Device is configured and functioning properly, it is
highly recommended that you back up your configuration file before making
configuration changes. The backup configuration file will be useful in case you
need to return to your previous settings.
Figure 86
Management > Settings > Backup
Click
Backup Settings
to save the ZyXEL Device’s current configuration to your
computer.
Page 178 / 300
Chapter 20 Settings
P-663HN-51 User’s Guide
178
20.2
Restore Configuration Using the Web
Configurator
Click
Management > Settings > Update
to open the following screen. Use this
screen to upload a new or previously saved configuration file from your computer
to your ZyXEL Device.
Figure 87
Management > Settings > Update
Do not turn off the ZyXEL Device while configuration file upload is
in progress
You must then wait before logging into the ZyXEL Device again. The ZyXEL Device
automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 88
Temporarily Disconnected
You may need to change the IP address of your computer to be in the same
subnet as that of the ZyXEL Device’s IP address (192.168.1.1). See the appendix
for details on how to set up your computer’s IP address.
Table 62
Settings File
Name
Type in the location of the file you want to upload in this field or click
Browse...
to find it.
Browse...
Click
Browse...
to find the file you want to upload. Remember that you
must decompress compressed (.ZIP) files before you can upload them.
Update
Settings
Click this to begin the upload process.
Page 179 / 300
Chapter 20 Settings
P-663HN-51 User’s Guide
179
20.3
Restoring Factory Defaults
Click
Management > Settings > Restore Default
to open the following screen.
Figure 89
Management > Settings > Restore Default
Click
Restore Default Settings
to clear all user-entered configuration
information and return the ZyXEL Device to its factory defaults.
You can also press the
RESET
button on the rear panel to reset the factory
defaults of your ZyXEL Device.
You may need to change the IP address of your computer to be in the same
subnet as that of the default ZyXEL Device IP address (192.168.1.1). See the
appendix for details on how to set up your computer’s IP address.