Page 41 / 127 Scroll up to view Page 36 - 40
Chapter 3 Basic Setup
Parameter
Description
Preferred DNS server
Primary DNS address
Alternate DNS server
Secondary DNS address
Enable DNS Relay
Whether to enable DNS relay
LAN Port1–LAN Port4
WLAN
Port1–WLAN Port1
LAN ports that the DHCP server belongs to
4.
Click
Apply
.
5.
(Optional) Add a DHCP client class.
a. In the
DHCP CLIENT CLASS LIST
area, click
Add
, see
Figure 3-27
.
Figure 3-27 ADD DHCP CLIENT CLASS Area
Configure the DHCP client class parameters. For a description of the parameters,
refer to
Table 3-17
.
Table 3-17 DHCP Client Class Parameter Descriptions
Parameter
Description
Client Class Name
Client class name
Min IP Address
Minimum IP address
Max IP Address
Maximum IP address
DNS Address
DNS address
b. Click
Apply
.
6.
(Optional) Add a DHCP Cond Option.
a. In the
DHCP COND OPTION
area, click
Add
, see
Figure 3-28
.
3-27
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 42 / 127
ZXHN H108N Maintenance Management Manual
Figure 3-28 ADD DHCP COND OPTION Area
Configure
the
DHCP
Cond
Option
parameters.
For
a
description
of
the
parameters, refer to
Table 3-18
.
Table 3-18 DHCP Cond Option Parameter Descriptions
Parameter
Description
Cond Option enable
Whether to enable DHCP Cond Option
Cond Option Client Class
Client class of DHCP Cond Option
Cond Option Tag
Value range: 240–245
Cond Option Value
Value carried by the CPE, which can be specified as
required
b. Click
Apply
.
7.
(Optional) Add a DHCP reserved address.
a. In the
DHCP RESERVATION LIST
area, click
Add
, see
Figure 3-29
.
Figure 3-29 ADD DHCP RESERVATION Area
Configure the DHCP reserved address parameters.
For a description of the
parameters, refer to
Table 3-19
.
3-28
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 43 / 127
Chapter 3 Basic Setup
Table 3-19 DHCP Reservation Parameter Descriptions
Parameter
Description
Enable
Whether to enable DHCP address reservation
Computer Name
Computer name
IP Address
Reserved IP address
MAC Address
Corresponding MAC address
b. Click
Apply
.
– End of Steps –
3.5 Configuring the Local IPv6 Network
This procedure describes how to configure the local network settings of the router.
Steps
1.
Select
Setup > Local IPv6 Network
. The
IPV6 LAND SETTINGS
page is displayed,
see
Figure 3-30
.
3-29
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 44 / 127
ZXHN H108N Maintenance Management Manual
Figure 3-30 IPV6 LAND SETTINGS Page
2.
Configure the local IPv6 network parameters.
For a description of the parameters,
refer to
Table 3-20
.
Table 3-20 Local IPv6 Network Parameter Descriptions
Parameter
Description
IPv6 Interface Address
IPv6 interface address.
Enable DHCPv6 Server
Whether to enable the IPV6 DHCP server.
LAN address config mode
LAN address configuration mode.
Start Interface ID
Starting port number of the address segment.
End Interface ID
Ending port number of the address segment.
DHCPv6 Lease Time
Lease time of the DHCPv6 address.
Get DNS Servers from WAN
Obtains the DNS server from the WAN.
Static DNS Servers
Static DNS server.
Static IPv6 DNS Servers
Static IPv6 DNS server.
Enable RADVD
Whether to enable RADVD.
3-30
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 45 / 127
Chapter 3 Basic Setup
Parameter
Description
Auto get prefix from WAN
Obtains WAN prefix automatically.
Static
Whether to enable static prefix.
Site Prefix
Static prefix.
3.
Click
Apply
.
– End of Steps –
3.6 Configuring the Time and Date
This procedure describes how to configure the time zone, Network Time Protocol (
NTP
)
server, and daylight saving.
Steps
1.
Select
Setup > Time and Date
. The
TIME AND DATE
page is displayed, see
Figure
3-31
.
Figure 3-31 TIME AND DATE Page
2.
Configure the time and date parameters. For a description of the parameters, refer to
Table 3-21
.
Table 3-21 Time and Date Parameter Descriptions
Parameter
Description
Automatically synchronize with
Internet time server
Whether to synchronize with the Internet time server
automatically
Primary NTP time server
Primary time server address
3-31
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top