Page 51 / 127
Scroll up to view Page 46 - 50
Chapter 4 Advanced Configuration
4.1.3 Configuring Security Parameters
The ZXHN H108N supports three wireless security modes, including Wired Equivalent
Privacy (
WEP
), Wi-Fi Protected Access (
WPA
), and WPA2.
WEP is the basic wireless
encryption standard. WPA and WPA2 provide higher levels of security.
None Security Mode
1.
Select
Advanced > Advanced Wireless > Security Settings
.
The
WIRELESS
SECURITY
page is displayed, see
Figure 4-3
.
Figure 4-3 WIRELESS SECURITY Page
2.
From the
Select SSID
list, select an SSID.
3.
From the
Security Mode
list, select
None
.
4.
Click
Apply
.
4-5
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 52 / 127
ZXHN H108N Maintenance Management Manual
WEP Security Mode
1.
Select
Advanced > Advanced Wireless > Security Settings
.
The
WIRELESS
SECURITY
page is displayed.
2.
From the
Select SSID
list, select an SSID.
3.
From the
Security Mode
list, select
WEP
, see
Figure 4-4
.
Figure 4-4 WEP Parameter Configuration Area
Configure the WEP parameters. For a description of the parameters, refer to
Table
4-3
.
Table 4-3 WEP Parameter Descriptions
Parameter
Description
WEP Key Length
l
64 bits (10 hex digits or 5 characters)
l
128 bits (26 hex digits or 13 characters)
Choose WEP Key
WEP provides four keys, which are from WEP Key1 to WEP
Key4
4-6
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 53 / 127
Chapter 4 Advanced Configuration
Parameter
Description
WEP Key1/WEP Key2/WEP
Key3/WEP Key4
WEP provides four keys, which are from WEP Key1 to WEP
Key4
Authentication
l
Open
l
Share Key
4.
Click
Apply
.
Auto (WPA or WPA2) Security Mode
1.
Select
Advanced > Advanced Wireless > Security Settings
.
The
WIRELESS
SECURITY
page is displayed.
2.
From the
Select SSID
list, select an SSID.
3.
From the
Security Mode
list, select
Auto (WPA or WPA2)
.
4.
From the
WPA Encryption
list, select
AES
or
TKIP+AES
.
5.
Perform one of the following operations:
l
From the
WPA Mode
list, select
Auto (WPA or WPA2)-PSK
, see
Figure 4-5
.
Figure 4-5 WPA and Pre-Shared Key Parameter Configuration Area
Configure the WPA and Pre-Shared Key parameters.
For a description of the
parameters, refer to
Table 4-4
.
Table 4-4 WPA and Pre-Shared Key Parameter Descriptions
Parameter
Description
Group Key Update Interval
Interval of updating the group key
Pre-Shared Key
Password used to connect to the client
4-7
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 54 / 127
ZXHN H108N Maintenance Management Manual
l
From the
WPA Mode
list, select
Auto(WPA or WPA2)-Enterprise
, see
Figure
4-6
.
Figure 4-6 WPA and EAP (802.1x) Parameter Configuration Area
Configure the WPA and EAP (802.1x) parameters.
For a description of the
parameters, refer to
Table 4-5
.
Table 4-5 WPA and EAP (802.1x) Parameter Descriptions
Parameter
Description
Group Key Update Interval
Interval of updating the group key
RADIUS server IP Address
802.1x server address
RADIUS server Port
802.1x server port number
RADIUS server Shared Secret
802.1x wireless authentication password
6.
Click
Apply
.
WPA2 Only or WPA Only Security Mode
The configuration methods for
WPA2 only
and
WPA only
are the same as that for
Auto
(WPA or WPA2)
.
4.1.4 Configuring the WPS
This procedure describes how to configure the Wireless Priority Service (
WPS
).
4-8
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 55 / 127
Chapter 4 Advanced Configuration
Enrollee Mode
1.
Select
Advanced > Advanced Wireless > WPS Settings
.
The
WIRELESS WPS
page is displayed, see
Figure 4-7
.
Figure 4-7 WIRELESS WPS Page
2.
Select
Enable
. From the
Select Mode
list, select
Enrollee
.
3.
Configure the WPS parameters. For a description of the WPS parameters, refer to
Table 4-6
.
Table 4-6 WPS Parameter Descriptions (Enrollee Mode)
Parameter
Description
Configuration State
Configuration state
Push Button
Whether to enable the WPS function
Input Station PIN
To save the Personal Identification Number (
PIN
) code
by clicking
PIN
WPS Session Status
WPS status
4.
Click
Apply
.
4-9
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
19216811.live