Page 31 / 127 Scroll up to view Page 26 - 30
Chapter 3 Basic Setup
Parameter
Description
Encapsulation Mode
Encapsulation type of the IP packets:
°
VCMUX
°
LLC
802.1Q VLAN ID
VLAN ID
Priority
802.1P priority
Enable QinQ
Whether to enable QinQ
Firewall Enable
Whether to enable the firewall
Enable Proxy Arp
Whether to enable proxy ARP
5.
Click
Apply
.
6.
(Optional) To modify the network connection configurations, click
Edit
.
7.
(Optional) To delete the network connection configurations, click
Delete
.
– End of Steps –
3.3 Wireless Configuration
Wireless configuration includes the following:
l
Wireless basic configuration
l
Wireless security configuration
3.3.1 Configuring Basic Wireless Parameters
This procedure describes how to configure basic wireless parameters.
Steps
1.
Select
Setup > Wireless > Wireless Basic
.
The
WIRELESS BASIC
page is
displayed, see
Figure 3-19
.
3-17
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 32 / 127
ZXHN H108N Maintenance Management Manual
Figure 3-19 WIRELESS BASIC Page
2.
Configure the wireless basic parameters. For a description of the parameters, refer to
Table 3-11
.
Table 3-11 Wireless Basic Parameter Descriptions
Parameter
Description
Enable Wireless
Whether to enable wireless
Enable MultiAP Isolation
Whether to enable isolation between multiple SSIDs
Wireless Network Name
(SSID)
SSID name
Visibility Status
l
Visible
l
Invisible
Country
Country or region
Control Sideband
l
Upper
l
Lower
Wireless Channel
Wireless channel, with the default of
Auto Scan
802.11 Mode
l
802.11b
l
802.11g
l
802.11n
l
802.11b/g
l
802.11n/g
l
802.11b/g/n
Band Width
l
20M
l
40M
l
20M/40M
3-18
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 33 / 127
Chapter 3 Basic Setup
3.
Click
Apply
.
– End of Steps –
3.3.2 Configuring Wireless Security
The ZXHN H108N supports three wireless security modes, including Wired Equivalent
Privacy (
WEP
), Wi-Fi Protected Access (
WPA
), and WPA2.
WEP is the basic wireless
encryption standard. WPA and WPA2 provide higher levels of security.
None Security Mode
1.
Select
Setup > Wireless > Wireless Security
. The
WIRELESS SECURITY
page is
displayed, see
Figure 3-20
.
Figure 3-20 WIRELESS SECURITY Page
2.
From the
Security Mode
list, select
None
.
3.
Click
Apply
.
3-19
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 34 / 127
ZXHN H108N Maintenance Management Manual
WEP Security Mode
1.
Select
Setup > Wireless > Wireless Security
. The
WIRELESS SECURITY
page is
displayed.
2.
From the
Security Mode
list, select
WEP
, see
Figure 3-21
.
Figure 3-21 WEP Parameter Configuration Area
3.
Configure the WEP parameters. For a description of the parameters, refer to
Table
3-12
.
Table 3-12 WEP Parameter Descriptions
Parameter
Description
WEP Key Length
l
64 bits (10 hex digits or 5 characters)
l
128 bits (26 hex digits or 13 characters)
Choose WEP Key
WEP provides four keys, which are from WEP Key1 to WEP Key4
WEP Key1/WEP Key2/WEP
Key3/WEP Key4
WEP provides four keys, which are from WEP Key1 to WEP Key4
3-20
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 35 / 127
Chapter 3 Basic Setup
Parameter
Description
Authentication
l
Open
l
Share Key
4.
Click
Apply
.
Auto (WPA or WPA2) Security Mode
1.
Select
Setup > Wireless > Wireless Security
. The
WIRELESS SECURITY
page is
displayed.
2.
From the
Security Mode
list, select
Auto (WPA or WPA2)
.
3.
From the
WPA Encryption
list, select
AES
or
TKIP+AES
.
4.
Perform one of the following operations:
l
From the
WPA Mode
list, select
Auto (WPA or WPA2)-PSK
, see
Figure 3-22
.
Figure 3-22 WPA and Pre-Shared Key Parameter Configuration Area
Configure the WPA and Pre-Shared Key parameters.
For a description of the
parameters, refer to
Table 3-13
.
Table 3-13 WPA and Pre-Shared Key Parameter Descriptions
Parameter
Description
Group Key Update Interval
Interval of updating the group key
Pre-Shared Key
Password used to connect to the client
l
From the
WPA Mode
list, select
Auto(WPA or WPA2)-Enterprise
, see
Figure
3-23
.
3-21
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top