Page 11 / 127 Scroll up to view Page 6 - 10
Chapter 2
Configuration Preparations
Table of Contents
Configuring TCP/IP
....................................................................................................
2-1
Logging In to the Device
.............................................................................................
2-2
2.1 Configuring TCP/IP
This procedure describes how to configure
TCP
/
IP
.
Context
The computer address needs to be configured in the same network segment as the ZXHN
H108N address so that the ZXHN H108N device can access the ZXHN H108N.
The default network settings for the ZXHN H108N are as follows:
l
IP address: 192.168.1.33
l
Subnet mask: 255.255.255.0
l
Default gateway: 192.168.1.1
Steps
1.
Configure TCP/IP.
a. In the
Local Area Connection Properties
dialog box, select
Internet Protocol
(TCP/IP)
.
b. Click
Properties
.
The
Internet Protocol (TCP/IP) Properties
dialog box is
displayed.
c. Select
Use the following IP address
.
Set
IP address
,
Subnet mask
, and
Default gateway
. For example, set the IP address to 192.168.1.33, the subnet
mask to 255.255.255.0, and the default gateway to 192.168.1.1.
d. Click
OK
.
Note:
The settings may change with the network requirements.
2.
Check the TCP/IP settings.
2-1
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 12 / 127
ZXHN H108N Maintenance Management Manual
Use the
Ping
command to check the connection between the computer and ZXHN
H108N.
If the computer fails to ping the ZXHN H108N, verify the following:
l
The Ethernet cable between the ZXHN H108N and the computer is correctly
connected.
l
The ZXHN H108N is powered on.
l
The network adapter driver is correctly installed on the computer.
l
The TCP/IP settings on the computer are correctly configured.
– End of Steps –
2.2 Logging In to the Device
You can configure the ZXHN H108N through web pages.
Prerequisite
The ZXHN H108N is properly connected and the computer is correctly configured.
Context
Web pages provide different configuration permissions for different users. For the user
permissions, refer to
Table 2-1
.
Table 2-1 User Permissions
Role
User Name/Password
Permission
Administrator
1234/1234
Has all the configuration permissions on
the web pages.
Common users
user/user
Have the permission of viewing some
configurations.
Steps
1.
Open the web browser.
2.
In the address bar, enter
, which is the default IP
address of the ZXHN H108N, and then press
Enter
. The login page is displayed, see
Figure 2-1
.
2-2
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 13 / 127
Chapter 2 Configuration Preparations
Figure 2-1 Login Page
3.
From the
Language
list, select a language. From the
UserName
list, select a user
name. In the
Password
text box, enter the password.
Note:
The default user name and password for the administrator are both
1234
.
4.
Click
login
. The ZXHN H108N home page is displayed, see
Figure 2-2
.
Figure 2-2 ZXHN H108N Web Page
– End of Steps –
2-3
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 14 / 127
ZXHN H108N Maintenance Management Manual
This page intentionally left blank.
2-4
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 15 / 127
Chapter 3
Basic Setup
Table of Contents
Configuring the Wizard Parameters
............................................................................
3-1
Configuring the Internet Parameters
...........................................................................
3-9
Wireless Configuration
.............................................................................................
3-17
Configuring the Local Network
..................................................................................
3-22
Configuring the Local IPv6 Network
..........................................................................
3-29
Configuring the Time and Date
.................................................................................
3-31
3.1 Configuring the Wizard Parameters
If you configure a router for the first time, you can click
Setup Wizard
for the configuration
guidance.
Context
The ZXHN H108N supports the following Internet connection modes:
l
Point to Point Protocol over Ethernet (
PPPoE
)
l
Point to Point Protocol over ATM (
PPPoA
)
l
Dynamic IP address
l
Static IP address
l
Bridge
Steps
1.
Select
Setup > Wizard
. The
SETTING UP YOUR INTERNET
page is displayed, see
Figure 3-1
.
3-1
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top