Page 36 / 127 Scroll up to view Page 31 - 35
ZXHN H108N Maintenance Management Manual
Figure 3-23 WPA and EAP (802.1x) Parameter Configuration Area
Configure the WPA and EAP (802.1x) parameters.
For a description of the
parameters, refer to
Table 3-14
.
Table 3-14 WPA and EAP (802.1x) Parameter Descriptions
Parameter
Description
Group Key Update Interval
Interval of updating the group key
RADIUS server IP Address
802.1x server address
RADIUS server Port
802.1x server port number
RADIUS server Shared Secret
802.1x wireless authentication password
5.
Click
Apply
.
WPA2 Only or WPA Only Security Mode
The configuration methods for
WPA2 only
and
WPA only
are the same as that for
Auto
(WPA or WPA2)
.
3.4 Configuring the Local Network
This procedure describes how to configure the local network settings of the router.
3-22
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 37 / 127
Chapter 3 Basic Setup
Steps
1.
Select
Setup > Local Network
.
The
LOCAL NETWORK
page is displayed, see
Figure 3-24
.
3-23
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 38 / 127
ZXHN H108N Maintenance Management Manual
Figure 3-24 LOCAL NETWORK Page
3-24
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 39 / 127
Chapter 3 Basic Setup
2.
In the
ROUTER SETTINGS
area, configure the parameters, see
Figure 3-25
.
Figure 3-25 ROUTER SETTINGS Area
For a description of the router settings parameters, refer to
Table 3-15
.
Table 3-15 Router Settings Parameter Descriptions
Parameter
Description
Router IP Address
Modem management IP address
Subnet Mask
Subnet mask
Domain Name
Domain name
Enable Proxy Arp
Whether to enable ARP proxy
Configure the second IP Address
and Subnet Mask for LAN
Secondary management IP address of the gateway
3.
(Optional) In the
DHCP SETTINGS (OPTIONAL)
area, configure the parameters, see
Figure 3-26
.
3-25
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 40 / 127
ZXHN H108N Maintenance Management Manual
Figure 3-26 DHCP SETTINGS Area
For a description of the Dynamic Host Configuration Protocol (
DHCP
) settings
parameters, refer to
Table 3-16
.
Table 3-16 DHCP Settings Parameter Descriptions
Parameter
Description
Enable DHCP Relay
Whether to enable DHCP relay
Relay IP Address
Relay server address
Enable DHCP Server
Whether to enable DHCP server
DHCP IP Address Range
DHCP IP address distribution range
DHCP IP Mask
Subnet mask of the DHCP IP address
DHCP Router IP
DHCP gateway address
DHCP Lease Time
DHCP address leasing time
Enable static DNS
Whether to enable static Domain Name Server (
DNS
) address
3-26
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top