ZXHN H108N Maintenance Management Manual

Registrar Mode

1.

Select

Advanced > Advanced Wireless > WPS Settings

.

The

WIRELESS WPS

page is displayed.

2.

Select

Enable

. From the

Select Mode

list, select

Registrar

, see

Figure 4-8

.

Figure 4-8 WIRELESS WPS Page–Registrar Mode

3.

Configure the WPS parameters. For a description of the WPS parameters, refer to

Table 4-7

.

Table 4-7 WPS Parameter Descriptions (Registrar Mode)

Parameter

Description

Configuration State

Configuration state

Generate PIN

To generate a new PIN code by clicking

New PIN

Pin Station

PIN code connection

WPS Session Status

WPS status

4.

Click

Apply

.

4-10

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Confidential

Chapter 4 Advanced Configuration

4.2 Configuring Port Forwarding

This procedure describes how to enable multiple ports (by selecting multiple ports or

specifying a port range) on a router and forward data through these ports to a single

computer in the network.

Context

Port forwarding is used to forward the incoming traffic from the WAN side to the internal

server with a private IP address at the LAN side. The internal port is required only when

the external port needs to be converted to a different port number that is used by the server

at the LAN side. A maximum of 80 entries can be configured.

Steps

1.

Select

Advanced > Port Forwarding

. The

PORT FORWARDING

page is displayed,

see

Figure 4-9

.

Figure 4-9 PORT FORWARDING Page

2.

Click

Add

, see

Figure 4-10

.

4-11

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Confidential

ZXHN H108N Maintenance Management Manual

Figure 4-10 PORT FORWARDING Page–Adding a Port Forwarding Configuration

Item

Configure the port forwarding parameters.

For a description of the port forwarding

parameters, refer to

Table 4-8

.

Table 4-8 Port Forwarding Parameter Descriptions

Parameter

Description

WAN Connection

WAN connection type, which can be configured by selecting

Setup >

Internet Setup

.

Select

Select a Service

, and then select a service from the drop-down

list.

Server Name

Select

Custom Server

, and then enter the server name in the text box.

Schedule

l

Always

l

Never

l

Click

View Available Schedules

, that is, select

Advanced >

Schedule

to configure other options.

4-12

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Confidential

Chapter 4 Advanced Configuration

Parameter

Description

Server IP Address(Host

Name)

IP address or host name of the server.

External Port Start/End

External port range.

Protocol

Protocol of the permitted packets.

Internal Port Start/End

Internal port range.

Remote Ip

Remote IP address.

3.

Click

Apply

.

4.

(Optional) To edit the port forwarding configuration, click

Edit

.

5.

(Optional) To delete the port forwarding configuration, click

Delete

.

– End of Steps –

4.3 Configuring the DMZ

The ZXHN H108N forwards the IP packets that do not belong to any applications

configured in the port forwarding list, from WAN to the Demilitarized Zone (

DMZ

) host.

This procedure describes how to configure the DMZ parameters.

Steps

1.

Select

Advanced > DMZ

. The

DMZ

page is displayed, see

Figure 4-11

.

Figure 4-11 DMZ Page

2.

Configure the DMZ parameters.

For a description of the DMZ parameters, refer to

Table 4-9

.

4-13

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Confidential

ZXHN H108N Maintenance Management Manual

Table 4-9 DMZ Parameter Descriptions

Parameter

Description

WAN Connection

WAN connection type, which can be configured by selecting

Setup

> Internet Setup

.

Enable DMZ

Whether to enable DMZ.

DMZ Host IP Address

IP address of the LAN host that provides the DMZ service.

3.

Click

Apply

.

– End of Steps –

4.4 Configuring the SAMBA Service

SAMBA service is used to provide the file share service to the users at the LAN side.

Steps

1.

Select

Advanced > SAMBA

. The

SAMBA

page is displayed, see

Figure 4-12

.

Figure 4-12 SAMBA Page

2.

Configure the SAMBA parameters. For a description of the SAMBA parameters, refer

to

Table 4-10

.

Table 4-10 SAMBA Parameter Descriptions

Parameter

Description

Enable SAMBA

Whether to enable SAMBA

Workgroup

Group name

Netbios Name

Network Basic Input/Output System (

BIOS

) name

4-14

SJ-20121120142951-001|2012-11-30 (R1.0)

ZTE Proprietary and Confidential