Page 76 / 127
Scroll up to view Page 71 - 75
ZXHN H108N Maintenance Management Manual
Parameter
Description
Source port range
Source port range
Destination port range
Destination port range
Classify Queue
Queue classification
DSCP Mark
DSCP remarking
3.
Click
Submit
.
4.
(Optional) To edit a QoS classification configuration item, select it and click
Edit
.
5.
(Optional) To delete a QoS classification configuration item, select it and click
Delete
.
– End of Steps –
4.9 Configuring the Firewall
This procedure describes how to configure the firewal to enhance network security.
Steps
1.
Select
Advanced > Firewall Settings
. The
Firewall Settings
page is displayed, see
Figure 4-27
.
Figure 4-27 FIREWALL SETTINGS Page
4-30
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 77 / 127
Chapter 4 Advanced Configuration
2.
Select the check boxes to enable the protection functions as required.
3.
Click
Apply
.
– End of Steps –
4.10 Configuring a DNS
This procedure describes how to configure a Domain Name Server (
DNS
).
Context
DNS is a server that translates a
URL
or domain name to the corresponding IP address.
The Internet is based on an IP address, and the alphabetical URL or domain name is easier
to remember.
Steps
1.
Select
Advanced > DNS
. The
DNS
page is displayed, see
Figure 4-28
.
Figure 4-28 DNS Page
2.
Configure the DNS parameters.
For a description of the DNS parameters, refer to
Table 4-18
.
Table 4-18 DNS Parameter Descriptions
Parameter
Description
Wan Connection
WAN connection type
Primary DNS server
Primary DNS
Secondary DNS server
Secondary DNS
3.
Click
Apply
.
– End of Steps –
4-31
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 78 / 127
ZXHN H108N Maintenance Management Manual
4.11 Configuring a Dynamic DNS
This procedure describes how to configure a dynamic DNS. The host with a dynamic IP
address can then provide the domain name service.
Context
Dynamic Domain Name Server (
DDNS
) enables a server (such as Web, FTP, game server)
to be a host by using a domain name (www.xxx.com) and a dynamic IP address assigned
by the broadband Internet Service Provider (
ISP
). When the DDNS service is enabled, a
computer can access a server by entering the host name of the server rather than the IP
address.
Steps
1.
Select
Advanced > Dynamic DNS
. The
DYNAMIC DNS
page is displayed, see
Figure
4-29
.
Figure 4-29 DYNAMIC DNS Page
2.
Click
Add
, see
Figure 4-30
.
4-32
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 79 / 127
Chapter 4 Advanced Configuration
Figure 4-30 ADD DYNAMIC DNS Area
Configure the DDNS parameters. For a description of the parameters, refer to
Table
4-19
.
Table 4-19 DDNS Parameter Descriptions
Parameter
Description
DDNS provider
DDNS service provider
Hostname
Fully qualified host name, such as
myhost.mydomain.net
Interface
WAN-side interface PVC
Username
User name provided by the ISP
Password
Password provided by the ISP
HashKey
Hash key
3.
Click
Apply
.
4.
(Optional) To edit a DDNS configuration item, select it and click
Edit
.
5.
(Optional) To delete a DDNS configuration item, select it and click
Delete
.
– End of Steps –
4.12 Network Tools Configuration
Network tools include the following:
l
Port mapping
l
IGMP proxy
l
IGMP snooping
l
MLD
l
UPnP
l
ADSL
l
SNMP
l
TR-064 protocol
l
TR-069 protocol
l
Certificates
l
Printer
4-33
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
Page 80 / 127
ZXHN H108N Maintenance Management Manual
4.12.1 Configuring Port Mapping
This procedure describes how to configure port mapping.
Context
Port mapping refers to map multiple ports to a PVC and bridge groups. Each group works
as an independent network.
A maximum of five port mapping items can be configured.
Steps
1.
Select
Advanced > Network Tools > Port Mapping
. The
PORT MAPPING
page is
displayed, see
Figure 4-31
.
Figure 4-31 PORT MAPPING Page
2.
Click
Add
, see
Figure 4-32
. Configure the port mapping parameters.
4-34
SJ-20121120142951-001|2012-11-30 (R1.0)
ZTE Proprietary and Confidential
19216811.live