1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TVP-221H
    5. /
  5. 15
Page 71 / 100 Scroll up to view Page 66 - 70
TVP-221H User’s Guide
Case 6:
PLAR (Hotline) FXO to FXS example
Site A
Site B
This could be a call
placed from any outside
PSTN number
Case Scenario:
Outside PSTN caller near Site A wants calls automatically forwarded to extension 203
on Site B.
Definition
-
PLAR – Private Line Auto Ring – Bat phone / Hotline which allows you
to pick up phone and automatically be connected to pre-determined remote
destination.
Solution
: Set up hotline (PLAR) on TVP Gateway on Site A to TVP Gateway on Site
B.
This uses existing default local dial plan with the addition of a remote destination
zone number.
Usage
:
PSTN Caller near Site A picks up phone 8888-1234 and dials PSTN number
9999-2222 which is connected to Site A TVP Gateway FXO port 201.
TVP
Gateway A will automatically forward the call via internet to TVP Gateway
B FXS phone 203.
71
Page 72 / 100
TVP-221H User’s Guide
72
Site A TVP Gateway configuration - FXO to FXS PLAR
Telnet / Console
Web Configuration
Login in to Site A TVP Gateway
From Console
Logon to the Web Configuration by opening
your browser
Enter Username “admin”
Enter Password “123”
1.
Enter Wan IP xxx.xxx.xxx
Or if you are on the LAN,
192.168.0.20
or
2.
You will be prompted for Username
and Password. Default Username and
Password are “admin” and “123”
respectively.
Windows command prompt
Enter “telnet xxx.xxx.xxx.xxx”
Enter Username “admin”
Enter Password “123”
Web Configuration of Dial Plan
atpm req
Dial Plan Settings / Dial Plan Table Setup
atpm aadd
22 5 5 22 2
3.
Select “Add” and “Telephone
4.
Enter following fields
a.
Telephone Number: 22
b.
Hunt Group ID:
22
c.
Min. Digits:
5
d.
Max. Digits:
5
e.
Strip Length: 2
f.
Append Prefix: none
5.
Click on OK
Dial Plan Settings / Dial Plan Table Setup
6.
Select “Add” and “HuntGroup”
7.
Enter following fields
a.
Hunt Group ID: 22
b.
Destination ID 0: 22
8.
Click on OK
Dial Plan Settings / Dial Plan Table Setup
9.
Select “Add” and “DestinationID”
10.
Enter the following fields
a.
Destination ID: 22
b.
Hostname (or IP address)
192.168.0.55
c.
Click on OK
Dial Plan Settings / Dial in PLAR/CID
11.
Enter 22203 into the PLAR Address
Field
12.
Click on OK
Dial Plan Settings / Store Dial Plan
13.
Click on Yes
atpm hadd
22 2 22
atpm dadd
22 h323 192.168.0.55
atpm done
atpm store
set tcid 0 dial_in plar 22203
config activate
config store
Lines 3-10 creates a zone
number (a number that tells the
ATPM to forward to a remote
destination) address entry in
TVP GW A for TVP GW B
Lines 11-13 Setup the
hotline (PLAR) from TVP
Gateway A to TVP Gateway
B
Page 73 / 100
TVP-221H User’s Guide
Case 7:
PLAR (Hotline) FXS to FXO example
FXO 201
Site A
Site B
Caller on Site B could
dial any Site A local
PSTN number
Case Scenario:
Caller on Site B FXS 203 wants to be able to pick up phone and immediately have dial
tone to Site A local PSTN.
Solution
: Set up hotline (PLAR) on TVP Gateway on Site B to TVP Gateway on Site
A. This uses existing default local dial plan with the addition of a remote destination
zone number.
Definition
-
PLAR – Private Line Auto Ring – Bat phone / Hotline which allows you
to pick up phone and automatically be connected to pre-determined remote
destination.
Usage
:
Caller on Site B picks up FXS 203 phone and TVP Gateway B
automatically connects to TVP Gateway A FXO 201 which is connected to
PSTN line 9999-2222.
Caller will hear PSTN dial tone on Site A and can
then call any number on local PSTN.
73
Page 74 / 100
TVP-221H User’s Guide
74
Site B TVP Gateway Configuration - FXS to FXO PLAR
Telnet / Console
Web Configuration
Login to Site A TVP Gateway
From Console
1.
Logon to the Web Configuration by opening
your browser
Enter Username “admin”
Enter Password “123”
2.
3.
You will be prompted for Username and
Password. Default Username and Password
are “admin” and “123” respectively.
or from
Windows command prompt
Enter “telnet 192.168.0.55”
Enter Username “admin”
Enter Password “123”
Web Configuration of Dial Plan
Dial Plan Settings / Dial Plan Table Setup
atpm req
4.
Select “Add” and “Telephone
atpm aadd
11 5 5 11 2
5.
Enter following fields
a.
Telephone Number :11
b.
Hunt Group ID:
11
c.
Min. Digits:
5
d.
Max. Digits:
5
e.
Strip Length:
2
f.
Append Prefix: none
6.
Click on OK
Dial Plan Settings / Dial Plan Table Setup
7.
Select “Add” and “HuntGroup”
8.
Enter following fields
a.
Hunt Group ID: 11
b.
Destination ID: 11
9.
Click on OK
Dial Plan Settings / Dial Plan Table Setup
10.
Select “Add” and “DestinationID”
11.
Enter the following fields
a.
Destination ID: 11
b.
Hostname (or IP address)
192.168.0.20
c.
Click on OK
Dial Plan Settings / Dial in PLAR/CID
12.
Enter 11201 in the PLAR Address Field
13.
Click on OK
Dial Plan Settings / Store Dial Plan
14.
Click on Yes
atpm hadd
11 2 11
atpm dadd
11 h323
192.168.0.20
atpm done
atpm store
set tcid 0 dial_in plar 11201
config activate
config store
Lines 4-13 creates a zone
number (a number that tells
GW B to forward to a remote
destination) for TVP GW A.
Case 8:
PLAR (Hotline) FXO to FXO example
Lines 12-14 setup the hotline
(PLAR) from TVP Gateway
B to TVP Gateway A
Page 75 / 100
TVP-221H User’s Guide
75
Case Scenario:
Site A
Site B
Caller on Site A PBX
could pick up any PBX
extension
FXO (201)
FXO (201)
Site A PBX Extension Caller 316 wants to be able to pick up phone, dial a number and
immediately have dial tone on Site B PBX, and then be able to call any Site B PBX
extension.
Solution
: Set up hotline (PLAR) on TVP Gateway on Site A
Usage
:
Caller on Site A picks up any PBX extension and dials extension 201. TVP
Gateway A automatically establishes a connection with TVP Gateway B
Port 0, FXO 201 to get the dial tone from PBX on site B. After getting dial
tone,
the caller can call any Site B PBX extension.
Site A TVP Gateway Configuration - FXO to FXO PLAR

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top