Given below is full router user manual of TRENDnet TDM-C400 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 15
Table of Contents
Version 09.07.2006
English
.......................................................................................................
Troubleshooting
........................................................................................
1
1
3
4
7
10
1. Before You Start
2.
.........................................................................
3.
..................................................................................
Hardware Installation .
Software Installation (TDM-C400 only)
...............................................
4. Configuring the ADSL Modem through Ethernet or USB connection ..
Page 3 / 15
Installation Requirements
Application
ADSL/ADSL2/ADSL2+ service up and running on your telephone line.
Package Content
1. Before You Start
English
1
TDM-E400/TDM-C400
CD-ROM (User's Guide)
Quick Installation Guide
1 x RJ-45 Cat.5 Cable
1 x USB Cable (for TDM-C400 only)
1 x RJ-11 Telephone Cable
Power Adapter (15V DC 1A)
One or more computers each containing an Ethernet 10Base-T/100Base-T
network interface card (NIC) and/or a single computer with a USB port
An Ethernet hub or switch, if you are connecting the device to more than
one computer on an Ethernet network
Web browser: Internet Explorer v5.0 or later, or Netscape v6.1 or later
ADSL Enabled Phone Jack
ADSL/ADSL2+ Ethernet Modem Router
(TDM-E400)
ADSL/ADSL2+ Ethernet/USB Combo Modem Router
(TDM-C400)
Workstations with10/100Mbps
Fast Ethernet PCI Adapter
(TE100-PCIWN)
5-port 10/100Mbps
Fast Ethernet Switch
(TE100-S5P)
Workstation with 10/100Mbps
Fast Ethernet PCI Adapter
(TE100-PCIWN)
Stand-Alone PC
Internet
(TDM-C400 only)
Page 4 / 15
English
2
Collect the following information from your
ADSL2+ service provider
VPI value: ______
VCI value: ______
Encapsulation type:
LLC/SNAP or
VC/MUX
As well as:
For PPPoA (RFC2364) or PPPoE (RFC2516)
User Name: _______________________
Password: ________________________
Authentication method:
PAP or
CHAP
Host or IP address: _________________
For Static or Fixed IP Connectin (RFC1483 or RFC1577)
Host: ____________________________
Domain: __________________________
Gateway: _________________________
IP address: _______________________
Subnet Mask: _____________________
DHCP Server IP : __________________
Primary DNS Server IP: ______________________
Secondary DNS Server IP: ____________________
Page 5 / 15
English
3
2. Hardware Installation
3.
Attach the power connector to the
ADSL2+ ethernet router.
2.
Connect the RJ-45 cable (and/or
connect the USB cable for
TDM-C400 USB combo Model
only).
1.
Connect the RJ-11 cable.
4.
Allow the device 60 seconds to
boot. Verify that the WAN and LAN
LEDs are on.
19216811.live