Given below is full router user manual of TRENDnet TE100-P1Uv2 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 10
Table of Contents
Version 03.24.06
English
......................................................................................................
Troubleshooting
........................................................................................
1
1
2
3
5
7
1. Before You Start
2. How to Connect
.................................................................................
3. Configure the Print Server
.................................................................
4. Add the Network Printer to your PC
...................................................
.................................................................................
Page 3 / 10
1. Before You Start
English
1
TE
Quick Installation Guide
Utility CD-ROM
Power Adapter (5V, 2.5A)
100-P1U
Package Content
System Requirements
10/100Mbps USB 2.0
Print Server
(TE100-P1U)
Workstations with
Fast Ethernet Adapter
(TE100-PCIWN)
*Mac Systems are only compatible with Post-Script printers
USB Printer
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)
Cable/DSL
Modem
Internet
Application
CD-ROM Drive
CPU: Intel Pentium 100Mhz or above
Memory: 8MB or above
Windows 2003/XP/2000/ME/98SE, Unixware, Linux, Mac OS X
Page 4 / 10
2. How to Connect
English
2
Note:
Please power off all printers before connecting them to the print server.
1.
Connect a RJ-45 network cable
from a Switch/Router to the
LAN
port of the Print Server.
2.
Connect the USB Printer to the
USB
port of the Print Server.
3.
Connect the
AC Power Adapter
to
the Print Server and then to a
power outlet.
4.
Power
ON
printer.
Page 5 / 10
English
3
1.
Insert the
Utility CD-ROM
into
your computer's CD-ROM Drive
and then click
Install Utility
.
Follow the
InstallSheild Wizard
instructions. Click
Finish
.
2.
Click
Start
>
All Programs
>
PS-
Utility
, and then click
PS-Utility
.
3. Configure the Print Server
Note: The Print Server can be managed using the PS-Utility or a web browser.
For Mac Users, change your computers IP address to 192.168.0.X (where X is
an available number from 2-254), and enter
192.168.0.1 in your web browser to
access the Print Server's Web Utility.
(The Print Server Utility only requires to
be installed on one of the network PCs)
For Windows Users
3.
Click the Print Server and click
Change IP Address
.
Manually set the
IP Address
of the
Print Server and then click
OK
.
Note: The IP Address must match
the same network segment as your
computer.
19216811.live