Page 6 / 10 Scroll up to view Page 1 - 5
5.
Write down the
Server Name
and
Port Name
.
4.
Click
Show Web Setup.
English
4
Print Server configuration is now complete.
Page 7 / 10
English
5
4. Add the Network Printer to your PC
Note: For TCP/IP Printing instructions, please consult the User’s Guide
included on the Utility CD-ROM.
Windows 2000/XP
1.
Go into the
Control Panel
and
double-click the
Printers and
Faxes
icon. Click
Add Printer
and
then click
Next
.
2.
Select
Network Printer
and then
click
Next
.
3.
Select
Connect to this printer
and type in the server name and
the printer name in the following
format:
\\server_name\printer_name
Click
Next
.
Page 8 / 10
English
6
Add Network Printer is now complete.
For detailed information regarding the TE100-P1U configuration and advanced
settings, please refer to the User's Guide included on the Utility CD-ROM or
TRENDnet's website at www.trendnet.com
6.
Click
Finish.
5.
Select the appropriate driver for
your printer and then click
OK.
7.
Repeat steps 1 to 6 to add the
network printer to other computers
on the network.
4.
Click
OK
.
Page 9 / 10
Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
I correctly typed in the print server name and printer name, but I still cannot add a
network printer. What should I do?
Double check your hardware connections; make sure that the print server and printer
are powered ON and are properly connected. Also verify that the spelling of the server name
and printer name are correct.
I verified that the hardware installation is correct and that the print server name and
printer name are correct, but I still cannot find the network printer. What should I do?
Make sure that the print server name and printer name are entered correctly. There
should be no spaces, and the back slashes that separate the print server name and printer
name should be this,
\\
, instead of this,
//
. Note that the Port Name is the same name used to
identify the Printer Name.
I successfully added a network printer to my computer and I can print a test page, but I
cannot print anything from Microsoft Word or other applications.
Make sure to set the newly installed network printer as your
default
printer. Click Start
and then click Printers & Faxes, verify that your printer icon has a check on it.
I configured my print server to automatically receive an IP Address from a DHCP server,
and now I cannot go into the print server's web utility.
Open PS-Utility v3.00 (See 3. Configure the Print Server) to locate your print server's IP
Address.
For Mac users, press the Reset button at the back of the TE100-P1U, hold the
button for 15 seconds, release the button, and enter
in a web browser to
access the web features.
7
Troubleshooting
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
Waste electrical and electronic products
must not be disposed of with household
waste. Please recycle where facilities
exist. Check with you Local Authority or
Retailer for recycling advice.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Page 10 / 10
Copyright ©2006. All Rights Reserved. TRENDnet.
3135 Kashiwa Street
Torrance, CA 90505
USA
TRENDnet Technical Support
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
Tech Support Hours
24/7 Toll Free Tech Support
Contact
Telephone:
1(866) 845-3673
Email:
US/Canada Support Center
European Support Center
Contact
Visit our website for detail contact
information
http:// www.trendnet.com/support

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top