Page 26 / 64
Scroll up to view Page 21 - 25
17
Step 2: Choose time zone
Select the time zone from the drop down list. Please click “Next” to continue.
Step 3: Set LAN connection and DHCP server
Set user’s IP address and mask. The default IP is 192.168.1.1. If the user chooses to
enable DHCP Server, please click “Enable”. DHCP Server enabled is able to
automatically assign IP addresses to the LAN computers. Please assign the range of
IP addresses in the fields of “Range start” and “Range end”. Please click “Next” to
continue.
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 64
18
Step 4: Set Internet connection
The WLAN Router will attempt to auto detect your Internet Connection.
If the WLAN Router is unable to auto detect your Internet connection, you will
need to manually select the Internet connection type: PPPoE to obtain IP
automatically; PPPoE with a fixed IP address; PPTP.
Obtain IP automatically (DHCP client):
If the user has enabled DHCP server, choose "Obtain IP automatically (DHCP
client)" to have the WLAN Router assign IP addresses automatically.
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 64
19
Fixed IP Address:
If the Internet Service Provider (ISP) assigns a fixed IP address, choose this option
and enter the assigned WAN IP Address, WAN Subnet Mask, WAN Gateway
Addres and DNS Server Addresses for the WLAN Router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 64
20
PPPoE to obtain IP automatically:
If connected to the Internet using a PPPoE (Dial-up xDSL) connection, and the ISP
provides a User Name and Password, then choose this option and enter the required
information.
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 64
21
PPPoE with a fixed IP address:
If connected to the Internet using a PPPoE (Dial-up xDSL) connection, and the ISP
provides a User Name, Password and a Fixed IP Address, choose this option and
enter the required information.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live