TRENDnet TEW-452BRP Router Manual PDF (Setup & Configuration Guide)

Page 46 / 64 Scroll up to view Page 41 - 45

37

Statistic

This screen displays a table that shows the rate of packet transmission via the

WLAN Router’s LAN, Wireless and WAN ports (in bytes per second).

Click “Reset” to erase all statistics and begin logging statistics again.

Wireless

This screen enables users to view information about wireless devices that are

connected to the WLAN Router.

Connected Time:

Displays how long the wireless client has been connected to the

WLAN Router.

MAC Address:

Displays the wireless client’s MAC address.

Downloaded from

www.Manualslib.com

manuals search engine

Page 47 / 64

38

Routing

This selection enables users to set how the WLAN Router forwards data: Static and

Dynamic. Routing Table enables users to view the information created by the

WLAN Router that displays the network interconnection topology.

Static

It enables users to set parameters by which the WLAN Router forwards data to its

destination if the network has a static IP address.

Network Address:

Type the static IP address the network uses to access the

Internet. Contact the ISP or network administrator for this information.

Network Mask:

Type the network (subnet) mask of the network. If this field is left

blank, the network mask defaults to 255.255.255.0.

Contact the ISP or network

administrator for this information.

Gateway Address:

Type the gateway address of the network. Contact the ISP or

network administrator for this information.

Interface:

Select an interface, WAN or LAN, to connect to the Internet.

Metric:

Select which metric that the user wants to apply to this configuration.

Add:

Click to add the configuration to the static IP address table at the bottom of

the page.

Update:

Select one of the entries in the static IP address table at the bottom of the

page, and after changing parameters, click “Update” to confirm the changes.

Delete:

Select one of the entries in the static IP address table at the bottom of the

page and click “Delete” to remove the entry.

New:

Click “New” to clear the text boxes and add required information to create a

new entry.

Downloaded from

www.Manualslib.com

manuals search engine

Page 48 / 64

39

Dynamic

This screen enables users to set NAT parameters.

NAT:

Click the radio buttons to enable or disable the NAT function.

Transmit:

Click the radio buttons to set the desired transmit parameters, disabled,

RIP 1, or RIP 2.

Receive:

Click the radio buttons to set the desired transmit parameters, disabled,

RIP 1, or RIP 2.

Routing Table

This screen enables users to view the routing table of the WLAN Router. The

routing table is a database created by the WLAN Router that displays the network

interconnection topology.

Network Address:

Displays the network IP address of the connected node.

Network Mask:

Displays the network (subnet) mask of the connected node.

Gateway Address:

Displays the gateway address of the connected node.

Interface

: Displays whether the node is connected via a WAN or LAN.

Metric:

Displays the metric of the connected node.

Type:

Displays whether the node has a static or dynamic IP address

Downloaded from

www.Manualslib.com

manuals search engine

Page 49 / 64

40

Access

This page enables you to define access restrictions, set up protocol and IP filters,

create virtual servers, define access for special applications such as games, and set

firewall rules.

Filters

Using filters to deny or allow the users to access.

Five types of filters to select:

MAC, URL blocking, IP, Protocol filter and Domain blocking.

MAC Filters

Downloaded from

www.Manualslib.com

manuals search engine

Page 50 / 64

41

MAC Filter:

Enables you to allow or deny Internet access to users within the

LAN based upon the MAC address of their network interface. Click the radio

button next to Disabled to disable the MAC filter.

Disable:

Disable the MAC filter function.

Allow:

Only allow computers with MAC address listed in the MAC Table.

Deny:

Computers in the MAC Table are denied Internet access.

MAC Table:

Use this section to create a user profile which Internet access is

denied or allowed.

The user profiles are listed in the table at the bottom of the

page.

(Note: Click anywhere in the item. Once the line is selected, the fields

automatically load the item's parameters, which you can edit.)

Name:

Type the name of the user to be permitted/denied access.

MAC Address:

Type the MAC address of the user's network interface.

Add:

Click to add the user to the list at the bottom of the page.

Update:

Click to update information for the user, if you have changed any of the

fields.

Delete:

Select a user from the table at the bottom of the list and click Delete to

remove the user profile.

New

: Click New to erase all fields and enter new information.

URL Blocking

You could enable URL blocking to deny the users from accessing the specified

URL.

Add those specified URL in the text box.

Enable / Disable:

Enable or Disable the URL blocking function of the WLAN

Router.

Add:

Add the specific URL to the URL blocking list.

Delete:

Selected a URL from the blocking list then click the

Delete

button to

remove the URL from the URL Blocking list.

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share