TRENDnet TEW-452BRP Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

TRENDnet

TEW-452BRP

Page 36 / 64 Scroll up to view Page 31 - 35

End IP:

Type an IP address to serve as the end of the IP range that DHCP will use

to assign IP addresses to all LAN devices connected to the WLAN Router.

Domain Name:

Type the local domain name of the network in the text box. This

item is optional.

Lease Time:

The lease time specifies the amount of connection time a network

user be allowed with their current dynamic IP address.

WAN

This screen enables users to set up the WLAN Router WAN connection, specify the

IP address for the WAN, add DNS numbers, and enter the MAC address.

Connection Type:

Select the connection type, either DHCP client, Fixed IP,

PPPoE, PPTP or L2TP from the drop-down list.

WAN IP:

Select whether user wants to specify an IP address manually, or want

DHCP to obtain an IP address automatically. When Specify IP is selected, type the

IP address, subnet mask, and default gateway in the text boxes. User’s ISP will

provide with this information.

DNS 1/2/3:

Type up to three DNS numbers in the text boxes. User’s ISP will

provide this information.

MAC Address:

If required by user’s ISP, type the MAC address of the WLAN

Router WAN interface in this field.

Downloaded from

www.Manualslib.com

manuals search engine

Page 37 / 64

Password

This screen enables users to set administrative and user passwords. These

passwords are used to gain access to the WLAN Router interface.

Administrator:

Type the password the Administrator will use to log into the

system. The password must be typed again for confirmation. The Administrator can

also authorize users the ability to configure the WLAN Router.

User:

Type the password the User will use to log in to the system. The password

must be typed again for confirmation.

Time

This screen enables users to set the time and date for the WLAN Router's real-time

clock, select properly time zone, and enable or disable daylight saving.

Downloaded from

www.Manualslib.com

manuals search engine

Page 38 / 64

Local Time:

Displays the local time and date.

Time Zone:

Select the time zone from the drop-down list.

Synchronize the clock with:

Select the clock adjustment method form the drop-

down list.

Automatic: Automatically adjust the system time from NTP Server.

Manual: Manually adjust the system time when you press the

Set Time

button.

Default NTP server:

The Simple Network Time Protocol (SNTP) server allows

the WLAN Router to synchronize the system clock to the global Internet through

the SNTP Server. Specify the NTP domain name or IP address in the text box.

Set the time:

Manually setting the WLAN Router system time, press the

Set Time

button to update the system time.

Daylight Saving:

Enables users to enable or disable daylight saving time. When

enabled, select the start and end date for daylight saving time.

Dynamic DNS

This synchronizes the DDNS server with your current Public IP address when you

are online.

First, you need to register your preferred DNS with the DDNS provider.

Then, please select the DDNS address in the Server Address and fill the related

information in the below fields: Host Name, User Name and Password.

Downloaded from

www.Manualslib.com

manuals search engine

Page 39 / 64

Wireless

This section enables users to configuration the wireless communications parameters

for the WLAN Router.

Basic

This page allow user to enable and disable the wireless LAN function, create a

SSID, and select the channel for wireless communications.

Wireless:

Enable or disable the wireless function of the WLAN Router.

AP Mode:

Enable the AP mode to set this device to a wireless access point device,

the WAN port will be changed to

LAN port and the NAT function will be disabled.

SSID:

Type an SSID in the text box. The SSID of any wireless device must match

the SSID typed here in order for the wireless device to access the LAN and WAN

via the WLAN Router.

Channel:

Select a transmission channel for wireless communications. The channel

of any wireless device must match the channel selected here in order for the

wireless device to access the LAN and WAN via the WLAN Router.

Super G mode:

From the drop list, there are four options:

Disabled,

Super G

without turbo

;

Super G with Dynamic turbo

and

Super G with Static turbo

The

turbo mode indicates the combination of two channels to enhance the throughput.

Super G without turbo indicates that it is on Super G mode without the channel

aggregation.

Dynamic turbo is able to automatically detect if any ‘11g based’

product is available.

If no, the connection is normal 11g speeds. Static turbo means

it will not go back to normal 11g once it’s enabled.

Extended Range Mode:

Enable and disable the wireless Extended Range

enhancement.

SSID Broadcast:

While SSID Broadcast is enabled, all wireless clients will be able

to view the WLAN Router’s SSID. For security purposes, users may want to

disable SSID Broadcast to ensure only authorized clients have access.

Downloaded from

www.Manualslib.com

manuals search engine

Page 40 / 64

Security

Authentication Type:

The authentication type default is set to open system.

There are four options: Disabled, WEP, WPA and WPA2.

WEP Encryption

WEP:

Open System and Shared Key requires the user to set a WEP key to

exchange data with other wireless clients that have the same WEP key..

Mode:

Select the key type: ASCII or HEX

WEP Key:

Select the level of encryption from the drop-down list. The WLAN

Router supports, 64 and 128-bit encryption.

Key 1 ~ Key 4:

Enables users to create up to 4 different WEP keys. Manually

enter a set of values for each key. Select a key to use by clicking the radio button

next to the key. Click

“Clear”

to erase key values.

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share