Page 11 / 64
Scroll up to view Page 6 - 10
4
Supported Features:
¾
High speed data transfer rate
¾
NAT for sharing 1 IP address to all LAN/WLAN users.
¾
PPPoE and PPTP protocol for Dial-Up ADSL.
¾
64/128 bit WEP Encryption
¾
WPA-PSK, WPA2-PSK, WPA, WPA2 security
¾
DHCP Server / Client.
¾
UPnP (Universal Plug and Play).
¾
Virtual Server mapping.
¾
URL filter (10 entries)
¾
IP filter (10 entries)
¾
Protocol filter (10 entries)
¾
Domain filter (40 entries)
¾
MAD address filter (50 entries)
¾
DNS
¾
Simple Firewall protection.
¾
Upgradeable firmware for future function.
¾
Simple installation using Setup Wizard.
¾
Easy configuration via Web Browser.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 64
5
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Wireless Super G
Broadband Router.
Unpacking
Open the box of the WLAN Router and carefully unpack it. The box should contain
the following items:
±
One Wireless Super G Broadband Router
±
One dipole antenna
±
One external power adapter
±
One CD-ROM with this User’s Guide
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the WLAN Router can be performed properly using the following
methods:
±
The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
±
Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.
±
Make sure that there is proper heat dissipation and adequate ventilation around
the Broadband Router.
Do not place heavy objects on the Broadband Router.
±
Fix the direction of the antennas. Try to place the Wireless Router in a position
that can best cover your wireless network. Normally, the higher you place the
antenna, the better the performance will be. The antenna’s position enhances the
receiving sensitivity.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 64
7
HARDWARE INSTALLATION
Front Panel
The figure below shows the front panel of the Wireless Super G Broadband Router.
Front Panel
SYSTEM
This indicator blinking green means the WLAN Router is working successfully.
Otherwise, this indicator always on or off means the function of the WLAN Router
has failed.
WAN (Link/ACT)
The indicators light green when the WAN port is connected to a xDSL/Cable
modem successfully.
The indicators blink green while the WAN port was transmitting or receiving data
from the xDSL/Cable modem.
WLAN (ACT)
This indicator lights green when there are wireless devices connected and
transmitting data to the WLAN Router.
LAN (Link/ACT)
These indicators light green when the LAN ports were connected successfully.
These indicators blinking green while the LAN ports were accessing data.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 64
8
Rear Panel
The figure below shows the rear panel of the Wireless Super G Broadband Router.
Rear Panel
Antenna
There is one 2dBi gain antenna on the rear panel for wireless connection.
LAN (1-4)
Four RJ-45 10/100Mbps Auto-MDIX ports for connecting to either 10Mbps or
100Mbps Ethernet connections.
WAN
In the four port broadband Router, there is an RJ-45 10/100Mbps Auto-MDIX port
for the WAN that connects to the xDSL/Cable modem for Internet connectivity.
POWER
Plug the power adapter to this power jack
RESET
Use a pin-shaped item to push to reset this device to factory default settings. It will
be a useful tool when the manager forgot the password to login, and needs to
restore the device back to default settings.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live