Page 76 / 131
Scroll up to view Page 71 - 75
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
73
An ISO Certificed Company
Step 3
Click
Apply
to take the settings effect.
Step 4
Click
End Points
in the
Voice Configuration
page and the following
page appears.
Page 77 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
74
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
End Point Name
The call-up number.
Login Name
The authentication name for registering VoIP
call.
Password
The authentication password for registering
VoIP call.
Admin State
The service state. Usually, you should choose
inservice
.
After finishing the settings, reboot the modem to take the settings effective.
If the login number is registered successfully, you can view the status.
Page 78 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
75
An ISO Certificed Company
Now, you can make a VoIP call with another effective number that is registered on
the SIP server.
3.4.5
DHCP Server
As a DHCP server, the modem maintains a pool of IP address and distributes it to
LAN hosts.
3.4.5.1
Global Settings
Choose
Configuration
>
DHCP Server
and the following page appears. In this
page, you can set the status of the DHCP server.
The following table describes the parameters of this page.
Field
Description
DHCP server is currently
Select it to enable DHCP server function.
When the PC connected to the modem is set
to obtain the IP address automatically, the
modem takes a valid IP address from the IP
address pool and assigns it to the PC. By
default, DHCP server is enabled.
DHCP server interfaces
It is used to edit the list of IP address that the
DHCP server operates on. DHCP server
Page 79 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
76
An ISO Certificed Company
Field
Description
status must be disabled for adding a new
DHCP server or deleting an existing DHCP
server.
3.4.5.2
Server Settings
Click
Server Settings
and the following page appears. In this page, you can
modify the DHCP server settings.
Click
Add Fixed Host
and the following page appears. In this page, you can set
host IP and MAC mapping.
Page 80 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
77
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
Maximum lease time
It is the maximum value to which the default
lease time can be set. The unit value is set in
second. By default, it is 86400 seconds (24
hour).
Default lease time
It is the time that the DHCP server leases IP
address to the DHCP client. After the preset
time, the lease IP address is released. The
unit value is set in second. By default, it is
43200 seconds (12 hour).
3.4.5.3
Advanced Settings
Click
Advanced Settings
and the following page appears. In this page, you can
configure the advanced DHCP server classes and subnet-pools.
19216811.live