Page 71 / 131
Scroll up to view Page 66 - 70
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
68
An ISO Certificed Company
Enter the proxy and the registrar in the corresponding fields. The proxy can be the
IP address of the SIP server. Generally, the registrar is as same as proxy.
Click
Go To Advanced view
and the following page appears. It provides more
parameters for you to modify.
Page 72 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
69
An ISO Certificed Company
3.4.4.3
End Points
Click
End Points
in the
VoIP Configuration
page and the following page appears.
In this page, you can view and modify end point settings, such as the login name,
password. You can also view the registration status.
Page 73 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
70
An ISO Certificed Company
Click
Go To Advanced view
and the following page appears. It provides more
parameters for you to modify.
It provides valid time for forward calling, and it supports three way conferences.
Take the basic settings for example. Click
and the following page appears.
Enter
End Point Name
(such as 755222666, which is the called number) and other
parameters. Then boot the system to take the settings effect immediately. The
registration status display
Registered
if it is registered in the SIP server
successfully.
Page 74 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
71
An ISO Certificed Company
You can dial up the numbers by a call terminal, such as X-Lite or telephone. The
number should have been registered in the SIP server to guarantee the
conversation goes well.
3.4.4.4
Dialing Plan
Click
Dialing Plan
and the following page appears. In this page, you can view and
modify digit map.
Digit map allows you to set the various dialing codes that are used to make VoIP
calls. You can activate or deactivate certain services. It is recommended not to
modify the default digit map, if you want to make VoIP call.
3.4.4.5
VoIP Configuration Example
The following describes the example of the voice configuration:
Page 75 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
72
An ISO Certificed Company
Step 1
Choose
Configuration
>
Voice Configuration
. Select a PVC from the
IP Interface Name
drop-down list, such as iplan. Then select the region.
Step 2
Click
Apply
and the following page appears. Enter the proxy and
registrar that are the IP address of the SIP server.
19216811.live