19216811.liveUser Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
48
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
Enable/Disable
the
Access
Concentrator
option
Enable or disable the access concentrator.
Access Concentrator
°
If select
Enable
, in the PPPoE Discovery
stage, the modem makes a choice
according to the AC-Name value after
receiving many PADO packets.
°
If
select
Disable
,
in
the
PPPoE
Discovery stage, the modem makes a
choice according other service (such as
the service that PADO provides), then it
sends PADR packets to each BRAS.
Obtain an IP Address
automatically
Through PPP dial-up to obtain an IP address
assigned by up-link equipment, such as
BRAS.
Use
the
following
IP
address
If you want to manually enter the WAN IP
address, select it and enter the IP address
provided by your ISP.
Enable NAT
Select
it
to
enable
network
address
translation (NAT) function of the modem. If
you do not enable NAT and want to the
modem to access the Internet normally, you
must add a route on the uplink equipment.
Otherwise, the access to the Internet fails.
Normally, it is required to enable NAT.
Add Default Route
Add a default route in the routing table.
Normally, it must be selected. Otherwise, you
have to add a default route manually.
Step 3
Enter the correct broadband user name, password and confirm
password. Select a proper PPP connection mode. Then click
Next
.