Page 56 / 131
Scroll up to view Page 51 - 55
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
53
An ISO Certificed Company
Sample 6: RFC2684 (IPv6)
Step 1
Select
RFC2684 (IPv6)
protocol. Set to
LLC/SNAP
encapsulation type
and
Bridged
encapsulation mode. Then click
Next
.
Step 2
In this example, select
Obtain an IPv6 address automatically
and
Add
Default Route
.
Page 57 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
54
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
Obtain an IPv6 address
automatically
Through PPP dial-up to obtain an IPv6
address assigned by up-link equipment, such
as BRAS.
Use the following IPv6
address
If you want to manually enter the WAN IPv6
address, select it and enter the IPv6 address
provided by your ISP.
Add Default Route
Add a default route in the routing table.
Normally, it must be selected. Otherwise, you
have to add a default route manually.
Step 3
Click
Next
and the following page appears. In this page, you can confirm
the modification.
Page 58 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
55
An ISO Certificed Company
Sample 7: Bridging
Step 1
Select
Bridging
protocol. Set to
LLC/SNAP
encapsulation type and
Bridged
encapsulation mode. Then click
Next
.
Step 2
In this example, select
Obtain an IP address automatically
,
Enable
NAT
, and
Add Default Route
.
Page 59 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
56
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
Obtain an IP Address
automatically
Through PPP dial-up to obtain an IP address
assigned by up-link equipment, such as
BRAS.
Use
the
following
IP
address
If you want to manually enter the WAN IP
address, select it and enter the IP address
and subnet mask provided by your ISP.
Obtain
DNS
server
address automatically
Select it to obtain DNS server address.
Use the following DNS
server address
If you want to manually enter the DNS server
address, select it and enter the primary DNS
server and secondary DNS server.
Step 3
Click
Next
and the following page appears. In this page, you can confirm
the modification.
Page 60 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
57
An ISO Certificed Company
Step 4
Check the configuration according to the requirements. When you
ensure that the configuration is correct, click
Apply
. The following page
appears.
19216811.live