Page 61 / 131
Scroll up to view Page 56 - 60
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
58
An ISO Certificed Company
3.4.2.2
ADSL
Click
ADSL
in the
Internet Connection Configuration
page and the following
page appears. In this page, you can modify ADSL parameters.
Page 62 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
59
An ISO Certificed Company
Click
Basic Attributes
and the following page appears. It lists all specific ADSL
attributes. In this page, you can configure the settings.
Page 63 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
60
An ISO Certificed Company
Defaults:
There are five options. Choose one line mode you need. The default
setting checks the most modulation modes. The modem negotiates the modulation
mode with the DSLAM.
The following table describes the ADSL data rate standards.
Data rate standard
Uplink
Downlink
Page 64 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
61
An ISO Certificed Company
Data rate standard
Uplink
Downlink
ADSL
1 Mbps
8 Mbps
ADSL2
1 Mbps
12 Mbps
ADSL2+
1 Mbps
24 Mbps
BisA Standard contains Bis/BisPlusAuto/BisPlusOnly/READSL2, AnnexA Standard
contains G.dmt/T1.413/G.lite. The difference between Annex M and Annex A is that
the uplink of Annex M can reach 2 Mbps, and Annex A can only reach 1 Mbps.
If you want to take the settings effect immediately, you should select
Start
in
ActiveteLine
field.
3.4.2.3
MAC Spoofing
MAC spoofing does not support bridge PVC.
Step 1
Click
MAC Spoofing
in the
Internet Connection Configuration
page
and the following page appears. Select
Enabled
(By default, MAC
Spoofing is disabled) and click
Next
.
Step 2
Enter the MAC address and click
Next
.
Step 3
Check the configuration. If you ensure that your configuration is correct,
click
Confirm
.
Page 65 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
62
An ISO Certificed Company
3.4.3
Local Network (LAN)
In this page, you can configure the local network.
3.4.3.1
IPv4 Address
Choose
Configuration
>
Local Network (LAN)
and the following page appears. In
this page, you can set the IP address and subnet mask of LAN.
The following table describes the parameters of this page.
Field
Description
Primary IP Address
19216811.live