Page 96 / 131
Scroll up to view Page 91 - 95
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
93
An ISO Certificed Company
Page 97 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
94
An ISO Certificed Company
3.6.5
Mac Filtering
May be you want to manage the MAC address to block or permit a PC on the LAN.
When you enable MAC filter rules, the modem serves as a firewall that works at
layer 2. The following describes the example of the Ethernent transport.
3.6.5.1
Rule
Click
Rule
in the
Mac Filter Configuration
page and the following page appears.
Click
and the following page appears. In this page, you can configure filtering
rules on the system.
The following table describes the parameters of this page.
Page 98 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
95
An ISO Certificed Company
Field
Description
GT
Greater than
LT
Less than
GTEQ
Greater than and equal to
LTEO
Less than and equal to
EQ
Equal to
NEQ
Not equal to
INRANGE
Include the range
EXRANGE
Exclude the range
The source MAC value is 00:1E:E3:00:2B:1C, that is the Ethernet physical address.
The destination MAC value is 00:1E:E3:00:2D:BC. After finishing the settings of
rule status and action, click
Apply
to take it effect.
3.6.5.2
Profile
Click
Profile
in the
Mac Filter Configuration
page. In this page, you can create
and configure filtering profiles.
Page 99 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
96
An ISO Certificed Company
Add a profile name as p2, and then click
to edit the p2. In this page, you can
attach or detach more than one filtering rules to a profile.
3.6.5.3
Transport
Choose
Mac Address
>
Transport
and the following page appears. In this page,
you can attach or detach filtering profiles to a transport. You can also enable or
disable filtering on a transport.
Page 100 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
97
An ISO Certificed Company
Before attaching the filtering profile to the specified transport, the profiles and rules
should be configured. For example, click
of the Ethernet transport. . You can
configure p1 attach Tx Path for the Ethernet transport, and it matches the
corresponding settings of rule1.