Page 111 / 131
Scroll up to view Page 106 - 110
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
108
An ISO Certificed Company
Field
Description
Firmware Version
The modem version.
Dsp Version
Digital signal processor (DSP) version
Operational Mode
The synchronism mode.
Watchdog
Inspect the running estate of the application
program.
Reset Defaults
Reset to the default values after rebooting.
3.8.3.2
Advanced
Click
Advanced
in the
DSL Port Configuration
page and the following page
appears.
The following table describes the parameters of this page.
Field
Description
CACMode
Connection admission control (CAC) mode.
Traffic Shaping
The volume of adapter communication.
Is Dsl Dma Up
Direct
memory
access
supported
high
broadband.
Page 112 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
109
An ISO Certificed Company
Field
Description
Reset Defaults
Reset to the default values after rebooting.
Note:
Some of the attributes displayed in the
DSL Port Configuration
page can be
set from the CLI. Enter
port a1 set ?
. The attributes is displayed as the output
of this command. Its function depends on the configuration of the DSLAM and
the capability of the central office the modem connected to.
3.8.4
Ethernet0/1/2/3
This page displays the current status and configuration of the Ethernet port. The
modem has four Ehternet ports. Because they are similar, we describe the example
of one Ethernet port. If the Ethernet port is working curently, the connected status
desplays true. On the contrary, it displays false. the Mac value is different if the
Ethernet port is not same.
3.8.4.1
Basic
Choose
Port Statistics
>
Ethernet0
and the following page appears. In this page,
you can view the the information of Ethernet port.
The following table describes the parameters of this page.
Field
Description
MAC
The network adapter interface identifier with
48 bits unique global address.
Connected
It displays the connection status.
Page 113 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
110
An ISO Certificed Company
Field
Description
Reset Defaults
Reset to the default values after rebooting.
3.8.4.2
Advanced
Click
Advanced
in the
Ethernet0 Port Configuration
page and the following page
appears. In this page, you can view the following information of the Etherent port.
Note:
Some of the attributes displayed in the
Ethernet0 Port Configuration
page
can be set from the CLI. Enter
ethernet set ?
. The attributes is displayed as the
output of this command. Its function depends on the configuration of the
DSLAM and the capability of the central office the modem connected to.
Page 114 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
111
An ISO Certificed Company
3.8.5
Wireless
This page displays the current status and configuration of the wireless port.
3.8.5.1
Basic
Choose
Port Statistics
>
Wireless
and the following page appears. In this page,
you can view the the information of wireless port.
3.8.5.2
Advanced
Click
Advanced
in the
Wireless Port Configuration
page and the following page
appears. In this page, you can view the following information of the wireless port.
Page 115 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
112
An ISO Certificed Company
Note:
19216811.live