Page 116 / 131
Scroll up to view Page 111 - 115
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
113
An ISO Certificed Company
Some of the attributes displayed in the
Wireless Port Configuration
page can
be set from the CLI. Enter
port wireless set ?
. The attributes is displayed as
the output of this command. Its function depends on the configuration of the
DSLAM and the capability of the central office the modem connected to.
3.9
Admin
Click
Admin
to enter system admin page. On the left page, there are seven options:
Firmware Upgrade
,
Back & Restore
,
Reboot
,
Remote Access
,
Lan Access
,
Change Password
, and
Time Zone
.
3.9.1
Firmware Upgrade
Choose
Admin
>
Firmware Upgrade
and the following page appears. In this page,
you can upgrade the software of the modem by TEImage.bin file.
Click
Browse
to select the upgrade file. The upgrade process may take several
minutes.
Note:
If it is not upgraded successfully, do not restart the modem or switch off the
modem. Try to upgrade the image file again until it is successful. If it is
upgraded successfully, restart the modem immediately to take the new software
effect.
Page 117 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
114
An ISO Certificed Company
3.9.2
Back & Restore
Choose
Admin
>
Back & Restore
and the following page appears.
Click
Backup
to save the current system configuration. Conexant.icf is the default
file.
Page 118 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
115
An ISO Certificed Company
Note:
The restore configuration file should be with “icf" format.
3.9.3
Reboot
Choose
Admin
>
Reboot
and the following page appears. In this page, you can
reboot the modem in two ways.
z
Last:
Reboot from the last revisal.
z
Factory:
Reboot from the factory default configuration.
3.9.4
Remote Access
Choose
Admin
>
Remote Access
and the following page appears. you can open
the remote access port for someone to login. Remote access, a management
station that is a host or range of hosts that can remotely access .Once the modem
has been configured to allow to remote access, the management station sends IP
traffic on a specific transport or port to the external port of the device. Any NAT or
firewall configuration is bypassed. This allows a network administrator access to
the configuration of the device without having to visit the site.
Page 119 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
116
An ISO Certificed Company
3.9.5
Lan Access
Choose
Admin
>
Lan Access
and the following page appears. It is used to enable
or restrict LAN side management access to the modem.
Page 120 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
117
An ISO Certificed Company
3.9.6
Change Password
Choose
Admin
>
Change Password
and the following page appears. If logging in
to the modem as a super user, you can modify the password of the modem. It is
advisable that the password should be changed to keep the system secure. Keep
the your password. If you forget the password, you need to reset the modem and
reset to the factory defaults.
3.9.7
Time Zone
This page displays the current time configuration of the system.
3.9.7.1
SNTP Client
Click
SNTP Client
in the
SNTP Client Configuration
page. In this page, you can
modify the SNTP client configuration. By default, the time zone is configured as
UTC.
19216811.live