1. Home
    2. /
  2. Manuals
    3. /
  3. Sagem
    4. /
  4. Livebox-2
    5. /
  5. 7
Page 31 / 140 Scroll up to view Page 26 - 30
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-9
2
The screen opposite appears.
Click
.
3
The screen opposite appears.
Carry out the operations described on
screen.
Click the
button to
continue installation.
4
The screen opposite appears.
Click the
button to
install your Residential Gateway on the
ETH
interface.
5
The screen opposite appears and
prompts you to wait.
Page 32 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-10
Reproduction and communication prohibited without the written permission of
E
6
The next screen appears. If your
computer has more than one Ethernet
card installed,
Select the Ethernet card connected to
the SAGEM F@st
TM
3202.
Then click
to confirm
your choice and continue configuring.
7
Now connect the RJ45/RJ45 Ethernet
cable by connecting one end of the
cable to the
ETH1
socket marked
on your SAGEM F@st™ 3202
and then connecting the other end of
the cable to an available Ethernet
socket on your computer as shown in
the animation displayed on screen.
Click the
button to
continue installation.
8
The next screen appears.
Enter the login identifier followed by the
login password.
These can be found in your
subscription confirmation email.
Click the
button to
continue installation.
9
The screen opposite appears and
prompts you to wait.
Page 33 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-11
10
After a relatively short time, the screen
opposite appears.
Installation is finished.
Click
.
Accessing your Residential Gateway's HTTP configurator
1
Double click the configuration icon
on the desktop, the Web
browser opens and the screen
prompting you to log in appears.
In the "User name" field, enter:
admin
In the "Password" field, enter:
admin
.
Click
OK
to confirm.
Note:
The bar at the top of the screen
shows the equipment's IP address.
2
Your computer's Web browser displays
the SAGEM F@st
TM
3202 home screen
via the default IP address specific to the
ETH interface:
The name of the equipment is
displayed in the home screen title:
live
b
o
x
.
You can now:
¾
Access the HTTP configurator (see section 5)
,
¾
Surf the Internet,
¾
Use the Internet to make phone calls if you have taken out a
subscription to the ADSL telephony service with your Internet service
provider (ISP).
Page 34 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-12
Reproduction and communication prohibited without the written permission of
E
Caution:
If, on installation, you entered an
incorrect
login identifier and
password, you could have continued and finished installation and
obtained access to the HTTP configurator.
However, you will not under any circumstances be able to surf
the Internet.
To surf the Internet, you must enter the correct information sent
to you by your Internet service provider. For this:
In the HTTP configurator's home page, select
Basic
followed by
the
Internet access
menu.
Page 35 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-13
3.2.1.2
In MacOS X
The
configuration
procedure described below was performed in
MacOS X
(10.1 or 10.2). It can be performed in other operating systems such as
MacOS 8.6
,
MacOS 9.1
and
MacOS 9.2
.
1
Click the
(apple) menu in the
menu bar, select "
System
Preferences
", then click the "
Network
"
icon.
The screen opposite appears.
The
Configuration:
field should be set
to
Automatic
The
Display:
field should be set to
Built-in Internet
Select the
TCP/IP
tab; the relevant panel appears.
The
Setup:
field should contain
Via DHCP
by default. If not, select this setting from the
drop-down list.
Note:
If the
Via PPP
setting is displayed, select the
PPPoE
tab then uncheck the
Login
via PPPoE
box.
This panel should show the IP address, the subnet mask supplied by the Internet service
provider (ISP) and the default IP address of the SAGEM F@st
TM
3202's LAN interface
(
192.168.5.1
).
Click
to confirm connection in DHCP mode.
The
DHCP client, DNS servers
and
Search domains
fields are optional.
Open your browser then enter the default IP
address of the SAGEM F@st
TM
3202's LAN
interface:
then click
Go to
to confirm; the login screen
opposite appears. Enter:
User name:
admin
Password:
admin
The home screen appears.

Rate

4.5 / 5 based on 2 votes.

Popular Sagem Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top