Page 36 / 140
Scroll up to view Page 31 - 35
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-14
Reproduction and communication prohibited without the written permission of
E
3.3
Installing and configuring your Residential Gateway with your
computer's Wi-Fi interface
3.3.1
Installing the drivers for the USB Wi-Fi key on your
computer
Before installing your SAGEM F@st™ 3202 Residential Gateway, you must
uninstall any other ADSL modem/router.
Page 37 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-15
3.3.1.1
In Windows XP
The
installation
procedure described was performed in
Windows
XP
.
Installation in other Windows
operating systems (98, ME and 2000) may
differ slightly.
On installation, you must not connect your USB Wi-Fi key before
prompted to do so (see step 6).
1
Insert the CD-ROM in your computer's
appropriate drive; the screen opposite
appears.
Proceed as described on screen.
Click the
button to
continue installation.
Note:
If this screen does not appear: Select
Start
, then
Run
, then enter:
"<CD-ROM drive letter> :\
autorun.exe
(for example e:\autorun.exe)
then click
OK
.
2
The screen opposite appears.
Click
.
Page 38 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-16
Reproduction and communication prohibited without the written permission of
E
3
The screen opposite appears.
Carry out the operations described on
screen.
Click the
button to
continue installation.
4
The screen opposite appears.
Click the
button to
install your Residential Gateway on the
Wi-Fi
interface.
5
The screen opposite
appears and
prompts you to wait.
Page 39 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-17
6
The screen opposite appears.
Connect your USB Wi-Fi adapter to a
corresponding available socket on your
computer as shown in the animation
displayed on screen.
7
The screen opposite appears.
Enter the WEP key (26 characters for
128-bit encryption and ten characters
for 64-bit encryption) marked on the
label affixed to the packaging, on the
CD-ROM cover and on the gateway's
casing.
Enter the login identifier followed by the
login password.
These can be obtained from your
subscription confirmation email.
Click
button to continue
installation.
8
The screen opposite appears.
Click the association button marked
REG
on the Residential Gateway to
make the
LED associated with the
Wi-Fi function blink.
Click the
button to
continue installation.
Page 40 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-18
Reproduction and communication prohibited without the written permission of
E
9
The screen opposite
appears and
prompts you to wait.
10
After a relatively short time, the screen
opposite appears.
The installation is finished.
Click
.
Accessing your Residential Gateway's HTTP configurator
1
Double click the configuration icon
on the desktop, the Web
browser opens and the screen
prompting you to log in appears.
In the "User name" field, enter:
admin
In the "Password" field, enter:
admin
.
Click
OK
to confirm.
Note:
The bar at the top of the screen
shows the equipment's IP address.
19216811.live