Page 41 / 140
Scroll up to view Page 36 - 40
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-19
2
Your computer's Web browser displays
the SAGEM F@st
TM
3202 home screen
via the default IP address specific to the
USB interface:
The name of the equipment is
displayed in the home screen title:
live
b
o
x
.
You can now:
¾
Access the HTTP configurator (see section 5)
,
¾
Surf the Internet,
¾
Use the Internet to make phone calls if you have taken out a
subscription to the ADSL telephony service with your Internet service
provider (ISP).
Caution:
If, on installation, you entered an
incorrect
login identifier and
password, you could have continued and finished installation and
obtained access to the HTTP configurator.
However, you will not under any circumstances be able to surf
the Internet.
To surf the Internet, you must enter the correct information sent
to you by your Internet service provider. For this:
In the HTTP configurator's home page, select
Basic
followed by
the
Internet access
menu.
Page 42 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-20
Reproduction and communication prohibited without the written permission of
E
3.3.1.2
In MacOS X
For future publication.
Page 43 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 3-21
3.4
Installing and configuring an additional computer
1
Insert the CD-ROM in your computer's
appropriate drive; the screen opposite
appears.
Proceed as described on screen.
Click the
button to
continue installation.
Note:
If this screen does not appear: Select
Start
, then
Run
, then enter:
"<CD-ROM drive letter> :\
autorun.exe
(for example e:\autorun.exe)
then click
OK
.
2
The screen opposite appears.
Click
.
4
The screen opposite appears.
Click the
button to
install your Residential Gateway on the
USB
interface (see section 3.1 - steps 5
to 9).
Click the
button to
install your Residential Gateway on the
ETH
interface (see section 3.2 - steps 5
to 10).
Click the
button to
install your Residential Gateway on the
Wi-Fi
interface (see section 3.3 - steps
5 to 10).
Page 44 / 140
3 - Installing and configuring the residential gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Page 3-22
Reproduction and communication prohibited without the written permission of
E
The steps concerning:
•
connecting the Residential Gateway to the telephone socket and to the mains
outlet.
•
And setting up your SAGEM F@st™ 3202 (login identifier and login password,
etc),
are not to be carried out when installing and setting up an additional computer,
whatever the interface (USB, ETH or Wi-Fi).
Page 45 / 140
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 4-1
4. Telephony over ADSL service
This section
¾
connection of an analogue telephone
§ 4.2
covers
¾
operation of the telephony over ADSL service
§ 4.3
¾
unavailability of the telephony over ADSL service
§ 4.4
19216811.live