1 - Introduction
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 1-5
The CD ROM contains:
•
the software for installing the Ethernet (ETH) and USB interfaces and the 802.11b/g
drivers.
•
the SAGEM F@st™ 3202 Reference Manual in pdf file format.
•
the SAGEM F@st™ 3202 CE declaration.
•
a download of a new software version (Rescue).
Supply incomplete or damaged.
If on receipt, the equipment is damaged or
incomplete, contact the Supplier of your SAGEM F@st™ 3202.
1.3
Prerequisites
To use the SAGEM F@st™ 3202, you must have the following:
¾
subscriptions to one or more service providers; access to certain services may entail taking
out a subscription.
¾
a computer equipped with a TCP/IP protocol stack:
•
an 802.11b/g interface.
or
•
a type A USB interface.
or
•
an Ethernet 10BASE-T or 10/100BASE-T interface,
¾
a WEB browser (Internet Explorer version 5 or above recommended).
Your computer's minimum configuration should be:
¾
for Windows: Pentium II, 400 MHz, RAM: 128 Mbytes,
¾
for MacOS: Power PC G3, 233 MHz, RAM: 128 Mbytes,
¾
30 Mbytes free on your hard disk,
¾
a monitor with minimum resolution of 1024 x 768.
If your computer does not have the Wi-Fi function, you must fit a Wi-Fi accessory
(IEEE 802.11b/g standard) to be able to connect to the WLAN access point of the SAGEM
F@st™ 3202. There are several types:
•
USB Wi-Fi keys,
•
PCMCIA Wi-Fi cards,
•
PCI Wi-Fi cards.
Use of the USB Wi-Fi key supplied with your SAGEM F@st™ 3202 is
recommended.
Before installing the SAGEM F@st™ 3202 Residential Gateway, we recommend
you uninstall any modem or other router (for example, an ADSL modem/router).
19216811.live