Page 41 / 92
Scroll up to view Page 36 - 40
X5668 / X5668U
User’s Guide
36
Parental Control
This feature allows you to configure some of PCs in LAN to surf Internet in specific
time period.
Figure 40: Parental Control Configuration
Click
Add
to add a rule of schedule for parental control.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 41: Time of Day Restriction Configuration
Global Setting
Enter the
Username
Select the
Browser’s MAC Address
or
Other MAC Address
to enter the specific
PC MAC address.
Check
those days
you want to block above PC to surf Internet.
Enter the
Start Blocking Time
and
End Blocking Time
Click
Save/Apply
.
Page 42 / 92
X5668 / X5668U
User’s Guide
37
Routing
The section shows the IP addresses or address routes for the computers connected
to the gateway to reach different destinations, such as the local network, the gateway,
or the Internet. The Routing feature provides three more setting pages including
Default Gateway and Static Route.
Default Gateway
Figure 47: Default Gateway Configuration
Global Setting
Check
Enable Automatic Assigned Default Gateway
checkbox, this router will
accept the first received default gateway assignment from one of the PPPoA,
PPPoE or Static IP/DHCP interface. If the checkbox is not checked, enter the
static default gateway AND/OR a WAN interface.
Click
Save
to save the configuration
NOTE: If changing the Automatic Assigned Default Gateway from “unselected” to
“selected”, you must reboot the router to get the automatic assigned default gateway
Static Route
Figure 48: Static Route Configuration
Page 43 / 92
X5668 / X5668U
User’s Guide
38
Click Add to add the static route path.
Figure 49: Add Static Route Configuration
Global Setting
Enter the
Destination Network Address
and
Subnet Mask
(range)
Check Use
Gateway IP Address
and enter the
IP address
where packet will be
forwarded to.
Check the
Use Interface
and select it from the list
Click
Save
to save the configuration
Page 44 / 92
X5668 / X5668U
User’s Guide
39
DSL
The DSL feature provides basic and advance configuration to set the DSL parameters.
Please contact technician for details before changing any parameters.
Figure 54: DSL Basic Configuration
Global Setting
Check to select the
DSL modulation
modes.
Select the
DSL phone line pair
, inner pair or outer pair. The inner pair is default
setting.
Check to select the
Capabilities
, Bitswap and SRA (Seamless Rate Adaption).
Click
Apply
to save the configuration
Click
Advanced Settings
to get details, please contact technician for support.
Print Server
The page provides Print Server configuration. You could enable this feature to use the
service of on-board printer server. Please refer Chapter Print Server Setup.
Figure 55: Print Server Configuration
Global Setting
Check to
Enable on-board print server
if you like to use this feature. Then enter
the Printer Name, Make and Model Name.
Page 45 / 92
X5668 / X5668U
User’s Guide
40
Click
Save/Apply
to save the configuration
19216811.live