1. Home
    2. /
  2. Manuals
    3. /
  3. Inteno
    4. /
  4. FG500

Inteno FG500 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Inteno FG500 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 11
Installation
Guide
English
Svenska
Suomi
Norsk
FG500
Fiber Residential Gateway
Page 2 / 11
3
2
English
Svenska
Suomi
Norsk
Installation
Guide
English
Language
Page
English
.......................
4
Svenska
.....................
8
Suomi
......................
12
Norsk
.......................
16
FG500
Fiber Residential Gateway
Page 3 / 11
5
4
English
Svenska
Suomi
Norsk
FG500
Fiber Residential Gateway
WPS
USB
Internet
TEL2
TEL1
WiFi
Ethernet
WAN
POWER
2
4
3
WIFI
5
6
8
7
9
1
USB
WPS
WAN
TEL1
TEL2
USB
USB
WPS
Start Box
Check that the following items
are in the Start Box:
•
Inteno FG500 Fiber Residential
Gateway
•
Power adapter
•
Network cable (white) (large connector)
•
Two antennas for WiFi (wireless data
connection)
The product must be placed so that it has
adequate ventilation. The product must
not be covered or placed in a confined
space as it can lead to overheating. A
misplaced product can mean shortened
lifespan due to increased operating tem-
perature. This may also affect the product
warranty.
Connecting the WAN
The WAN connection on the FG500 is a
fiber port on the bottom of the modem.
1. Remove the plastic cover which is
mounted on the fiber port on the
bottom of the modem.
2. The modem should be installed on the
wall bracket/tray mounted on the wall.
3. Remove the cover on the bracket by
moving it to the right.
4. A fiber connection is mounted in the
bracket. Remove the plastic covering
from the connector.
5. The bracket and the modem have three
(3) longitudinal mounting guides to
allow easy mounting of the modem to
the bracket.
6. Match the modem’s mounting guides
to the bracket and pull the modem to
the left.
7. The modem is now connected. If you
intend to use the wireless connection,
make sure you attach the two antennas
included in the start box.
Connecting the LAN
1. Connect the white network cable
between the FG500 network port (LAN
1-4) and the network port on the back
or side of your computer. NOTE! In
some cases, your broadband service
provider will instruct you to connect to
Back
Front/top
FG500
Fiber Residential Gateway
FG500
Fiber Residential Gateway
This installation guide will help you install the Inteno FG500, Fiber
Residential Gateway. Your service provider will supply you with
information about login.
a
b
d
c
Attention!
This product contains a laser transmitter. Lasers
can be harmful to the eyes. Therefore, the product should
be handled according to instructions. FG500 should only be
on (”ON”) when insta led in the wa l bracket/tray.
Page 4 / 11
7
6
English
Svenska
Suomi
Norsk
a specific network port (LAN 1-4). Verify
this in the documents and/or manual
you received from your service provider.
2. Finally, plug the power adapter into an
electrical outlet and the small connector
into the modem labelled “Power.”
3. The indicator lights will blink for roughly
30 seconds. If you have connected your
modem properly, the Power, WAN and
Internet indicator lights will be a fixed
green or yellow color. See picture label-
led “Front.” You have now connected
the FG500.
Connecting the
Wireless Local Area
Network (WiFi)
1. For wireless connection first perform a
search for available wireless networks in
your computer.
2. Compare the list with the SSID which is
shown on a sticker placed on the bot-
tom of the FG500.
3. Connect by clicking on the correct SSID
and then type in the encryption code
which is shown on the sticker labelled
WPA on the under side of the FG500.
Connecting your
digital TV Box for IPTV
1. A network cable was provided with
your digital TV Box. Connect it to the
network port (LAN 1-4). NOTE! In some
cases, your broadband service provider
will instruct you to connect to a specific
network port (LAN 1-4). Verify this in the
documents and/or manual you received
from your service provider.
2. Connect the other end of the network
cable to your digital TV Box for IPTV.
3. Start the digital TV Box for IPTV.
4. If a problem should occur during the
connection process, we recommend
that you contact your service provider.
Connecting
IP Telephony (VoIP)
1. Connect a telephone cable to the port
labeled TEL 1 on the FG500.
2. Connect the other end of the telephone
cable to your telephone. Alternatively,
follow the instructions from your service
provider.
3. Activate the telephony service according
to the instructions from your service
provider.
Description of
the front panel
From left to right
1. WPS
Off – WPS not activated
Blinking (green) – WPS activated
2. USB
On (green) – USB device detected
Off – No USB device detected
3. Internet
On (green) – IP-address received
On (red) – IP-adress not received
4. TEL 2
On (green) – Telephony service activated
Off – Telephony not service activated
Slow blinking (green) – Failed telephony
service activation
Fast blinking (green) – Incoming call
5. TEL 1
On (green) – Telephony service activated
Off – Telephony not service activated
Slow blinking (green) – Failed telephony
service activation
e
g
h
f
Fast blinking (green) – Incoming call
6. WiFi
On (green) – WIFI activated
Off – WIFI not activated
Blinking (green) – Activity
7. Ethernet
On (green) – LAN connected
Off – LAN not connected
Blinking (green) – Activity
8. WAN
On (green) – WAN connected
1000Mbps
Blinking (green) – Activity 1000Mbps
On (yellow) – WAN connected 100Mbps
Blinking (yellow) – Activity 100Mbps
Off – WAN not connected
9. Power
On (green) – Power on
On (red) – Start up failure (contact
service provider)
Off – Power off
Advanced network
administration
Check that the computer which is
connected to your modem has been
issued an automatic IP address between
192.168.1.2 and 192.168.1.254. You may
need to manually set the IP address.
For example: 192.168.1.23,
subnet mask: 255.255.255.0.
1. In your browser’s address line type
2. Login in using admin as user name and
admin as password
3. Select the function you want from the
modem’s menu on the left. Note that
network administration is only available
in the standard software. If your service
provider has their own software, this
function may be turned off or have only
limited function. Contact your service
provider for more information.
Troubleshooting
1. Is the power indicator light on modem
off? Check that the modem is pro-
perly connected to the power adapter.
Check that the power adapter is con-
nected to an electrical outlet and that
the LED on the power adapter is lit. If
the LED on the power adapter is not
lit up this may indicate a faulty power
adapter. If the modem is properly
connected and the power adapter
is lit but the
power indicator light on
the modem
is still not lit up this may
indicate a faulty modem. Contact your
service provider.
2. Are the Power or Internet indicator
lights red? Contact your service
provider.
3. Is the WAN indicator light off? Check
the connection between the WAN port
on the modem and your broadband
outlet. If the WAN indicator light is off,
despite proper connection, contact
your service provider.
4. Is the Ethernet indicator light off?
Check the connection between the
LAN port on the modem and the
Network Interface Card (NIC) in your
computer. Check that the NIC in your
computer is functioning properly.
5. Reset button. See picture labeled
“Back.” This button resets the modem
to factory settings. Press it for 10
seconds.
i
j
FG500
Fiber Residential Gateway
FG500
Fiber Residential Gateway
Page 5 / 11
9
English
Svenska
Suomi
Norsk
8
Startboxen
Kontrollera att följande finns
med i startboxen:
•
Inteno FG500 Residential Gateway
•
Strömadapter
•
Nätverkskabel LAN (vit)
•
Två antenner för WiFi (trådlös
dataanslutning)
Produkten måste placeras så att den
får god ventilation. Produkten får inte
övertäckas eller placeras i ett trångt
utrymme då det kan leda till överhett-
ning. En felplacerad produkt kan innebära
förkortad livslängd på grund av förhöjd
arbetstemperatur. Detta kan även påverka
garantvillkoren.
Inkoppling WAN
FG500 har sin WAN-anslutning i form
av en fiberkontakt på undersidan av
modemet.
1. Avlägsna plastskyddet som sitter
monterad på WAN-kontakten under
modemet.
2. Modemet skall nu monteras på den
bottenplatta/vägfäste som sitter
monterad på er vägg i anslutning till
inkommande bredbandsfiber.
3. Avlägsna täcklocket på bottenplattan
genom att dra det till höger.
4. I bottenplattan sitter en fiberkontakt
monterad, avlägsna plastskyddet som
sitter monterad på kontakten.
5. Bottenplattan och modemet har tre (3)
längsgående monteringsguider för att
underlätta monteringen av modemet på
bottenplattan.
6. Passa in modemets monteringsguider
i bottenplattans monteringsguider och
drag modemet till vänster.
7. Modemet är nu inkopplat. Om du
avser att använda WiFi (trådlös data-
anslutning) passa på att skruva på
medföljande antenner.
Inkoppling LAN
1. Koppla den vita nätverkskabeln mellan
FG500 nätverkskontakt (LAN1-4) och
nätverkskontakten på baksidan eller
sidan av din dator. OBS! I vissa fall
FG500
Fiber Residential Gateway
FG500
Fiber Residential Gateway
Den här installationsguiden hjälper dig att installera Inteno FG500,
Fiber Residential Gateway. Information om hur du loggar in och
får åtkomst till dina tjänster får du från din operatör.
a
b
c
FG500
Fiber Residential Gateway
WPS
USB
Internet
TEL2
TEL1
WiFi
Ethernet
WAN
POWER
2
4
3
WIFI
5
6
8
7
9
1
USB
WPS
WAN
TEL1
TEL2
USB
USB
WPS
Baksida
Framsida/topp
Observera!
Denna produkt innehå ler lasersändare. Laser
kan vara skadlig för ögonen. Därför ska produkten endast
hanteras enligt instruktion. FG500 ska endast vara påslagen
(”on”) när den är insta lerad i bottenplattan.
d

Rate

4.5 / 5 based on 2 votes.

Popular Inteno Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top