Inteno X5669A Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Inteno X5669A router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 11
Installation
Guide
English
Svenska
Suomi
Norsk
X5669 ADSL2+ Residential Gateway
Page 2 / 11
3
English
Svenska
Suomi
Norsk
2
English
Language
Page
English
.....................
4
Svenska
...................
8
Suomi
....................
12
Norsk
.....................
16
Installation Guide
X5669 ADSL2+ Residential Gateway
Page 3 / 11
5
4
English
Svenska
Suomi
Norsk
X5669 ADSL2+
Residential Gateway
Start Box
Check that the following items
are in the Start Box:
Inteno X5669 Residential Gateway
Power adapter
LAN Network cable (yellow)
(large contact)
Telephone cable (small contact)
Extension adapter (splitter) with
built-in DSL filter
Bracket (for upright mounting)
Connecting the DSL
Do as follows:
1. Shut down your computer.
2. Connect the telephone extension
adapter to the first telephone jack
inside the house.
3. Connect the telephone cable between
the telephone extension adapter where
it is marked ADSL and the X5669
DSL-port (DSL).
Connecting the LAN
1. Connect the yellow network cable
between the X5669 network port
(LAN 1-4) and the network port on the
back or side of your computer.
NOTE! In some cases, your broadband
supplier will instruct you to connect to
a specific network port (LAN 1-4).
Verify this in the documents and/or
manual you received from your service
provider.
2. Finally, plug the power adapter into
an electrical outlet and contact into the
modern where it is labelled “Power.”
3. Start the computer.
4. The colored lights will blink for roughly
30 seconds. If you have connected
your modem properly, the Power, WAN
and Internet lights will be a fixed green
color. See picture labelled “Front.” You
have now connected the X5669.
Back
Front
X5669 ADSL2+
Residential Gateway
X5669 ADSL2+
Residential Gateway
This installation guide will help you install the Inteno X5669
ADSL2+ Residential Gateway. Your service provider will supply
you with information about log in and access.
a
b
d
c
Page 4 / 11
7
6
English
Svenska
Suomi
Norsk
Connecting the
Wireless Local Area
Network (WLAN)
1. Search for available wireless networks
using the WLAN client.
2. Compare the list with the SSID which
is shown on a sticker on the under side
of the X5669.
3. Connect by double clicking on the
correct SSID and then providing the
encryption code which is shown on the
sticker labelled WPA on the under side
of the X5669.
Connecting your digital
TV Box for IPTV
1. A network cable was provided with
your digital TV Box. Connect it to the
network port (LAN 1-4). NOTE! In some
cases, your broadband service
provider will instruct you to connect to
a specific network port (LAN 1-4).
Verify this in the documents and/or
manual you received from your service
provider.
2. Connect the other end of the network
cable to your digital TV Box for IPTV.
3. Start the digital TV Box for IPTV.
4. If a problem should occur during the
connection process, we recommend
that you contact your service provider.
Connecting
IP Telephony (VoIP)
1. Connect the telephone cable to the
port labelled TEL 1 on the FG101.
2. Connect the other end of the telephone
cable to your telephone. Alternatively,
follow the instructions from your
service provider.
3. Activate the telephony service
according to the instructions from your
service provider.
Description of
the front panel
1.
Power indicator light
On (green) – The X5668 is connected
to a power source.
On (red) – Start up error (contact your
service provider)
Off – The X5668 is not connected to a
power source
2.
DSL indicator light
On – Connected to the DSL network
On – Not connected to the DSL
network
Blinking -- Active
3.
Internet indicator light
On (green) – IP address received
On (red) – IP address not received
5.
Ethernet indicator light
On – LAN connected
Off – LAN not connected
Blinking – Active
g
h
e
f
6.
WLAN indicator light
On – WLAN activated
Off – WLAN not activated
Blinking – Active
7.
WLAN-ON/OFF
On – WLAN activated
Off – WLAN not activated
Advanced network
administration
Check that the computer which is
connected to your modem has been
issued an automatic IP address between
192.168.1.2 and 192.168.1.254. You may
need to manually set the IP address. For
example: 192.168.1.23, subnet mask:
255.255.255.0.
1. In your browser’s address line type
2. Login in using admin for the user name
and admin for the password
3. Select the function you want from the
modem’s menu on the left. Note that
network administration is only available
in the standard software. If your service
provider has their own software, this
function may be turned off or have
only limited function. Contact your
service provider for more information.
Troubleshooting
1. Check that the power is on. The power
indicator light should be on (Power).
See picture labelled “Front.”
2. Is the power indicator light off? Check
that the modem is properly connected
to the power adapter. Check that
the power adapter is connected to an
electrical outlet. If the modem is
properly connected to an electrical
outlet, a power indicator light that is
still not on may indicate a faulty
modem or a faulty power adapter.
Contact your service provider.
3. Are the Power and Internet indicator
lights red? Contact your service
provider.
4. Is the DSL indicator light off? Check
the connection between the DSL port
on the modem and your telephone
jack. If the DSL indicator light is off,
despite proper connection, contact
your service provider.
5. Is your broadband connection is
broken when one of the telephones in
the house is lifted? This probably
means that the modem is not con
nected to the first telephone jack. This
is also the case if there is excessive
static on the line. Move the modem to
the first incoming telephone jack.
6. Is the Ethernet indicator light off?
Check the connection between the
LAN port on the modem and the
Network Interface Card (NIC) in your
computer. Check that the NIC in your
computer is functioning properly.
7. Reset button. See picture labelled
“Back.” This button resets the modem
to factory settings. Hold it in for
10 seconds.
i
j
X5669 ADSL2+
Residential Gateway
X5669 ADSL2+
Residential Gateway
Page 5 / 11
9
English
Svenska
Suomi
Norsk
8
X5669 ADSL2+
Residential Gateway
Startboxen
Kontrollera att följande finns
med i startboxen:
Inteno X5669 Residential Gateway
DC-adapter (strömadapter)
Nätverkskabel LAN (gul) (stor kontakt)
Telefonkabel (2 st) (liten kontakt)
Telefonmellanpropp.
Fot (för stående montering)
Inkoppling DSL
Gör så här:
1. Stäng av din dator.
2. Koppla telefonmellanproppen i ditt
första inkommande telefonjack.
3. Koppla en av telefonkablarna till
mellanproppen och X5669 DSL-
kontakt (DSL).
Inkoppling LAN
1. Koppla den gula nätverkskabeln
mellan X5669 nätverkskontakt
(LAN1-4) och nätverkskontakten på
baksidan eller sidan av din dator. OBS!
I vissa fall uppger din operatör att
datorn skall kopplas till en specifik
nätverkskontakt (LAN-1-4). Kontrollera
detta i eventuellt medföljande manual
från din operatör.
2. Koppla slutligen in strömadapter till
eluttaget och den andra änden i
kontakten på X5669 märkt Power.
3. Starta datorn.
4. Lamporna på modemet kommer att
blinka i cirka 30 sekunder. Har du gjort
allting rätt så kommer lamporna Power
och DSL lysa med fast grönt sken på
ditt modem, se bild ”Framsida”. Du är
nu färdig med inkopplingen av X5669.
Baksida
Framsida
X5669 ADSL2+
Residential Gateway
X5669 ADSL2+
Residential Gateway
Den här installationsguiden hjälper dig att installera Inteno X5669,
ADSL2+ Residential Gateway. Information om hur du loggar in
och får åtkomst till dina tjänster får du från din operatör.
a
b
c
c

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top