Page 61 / 92
Scroll up to view Page 56 - 60
X5668 / X5668U
User’s Guide
56
Figure 84: Management Configuration – Access Control: IP Address
Click to enable or disable Access Control by IP address.
Click
Add
to add IP address.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 85: Management Configuration – Access Control: Add IP Address
Global Setting:
Add the IP Address which is permitted to access the device and execute the
management service.
Click Save/Apply to save the settings
.
Page 62 / 92
X5668 / X5668U
User’s Guide
57
Password
There are three levels of access accounts: admin, support, and user. The user name
“admin” has unrestricted access to change and view configuration of the device. The
user name “support” is used to allow an ISP technician to access the device for
maintenance and to run diagnostics. The user name “user” can access the device,
view configuration settigns and statistics, as well as updaet the device software.
Figure 86: Management Configuration – Access Control: Password
Global Setting:
Select the level of
Username
Enter the
Old Password
Enter the
New Password
and
Confirm Password
Click
Save/Apply
to save the configuration.
Page 63 / 92
X5668 / X5668U
User’s Guide
58
Update Software
This page allows you to upgrade the software (firmware).
Figure 87: Management Configuration – Update Software
Global Setting:
First of all, you have to get the updated software (firmware) from ISP or
manufacture.
Click
Browser
to specify the location and filename
Click
Update Software
to start the process. It could take minutes to complete it.
Save / Reboot
This page allows you to save current configuration and reboot to use the settings.
Figure 88: Management Configuration – Save/Reboot (no picture)
Global Setting
Click
Save/Reboot to
save the changes and reboot the device
.
Click Reboot to discard changes and reboot the device only
Page 64 / 92
X5668 / X5668U
User’s Guide
59
10
Print Server Setup
This chapter describe function is only available with model X5668U.
The section will explain the steps of enabling the Printer Server function in this device.
This feature allows multiple users to share a printer from anywhere on the network.
You do not need to buy an extra network printer or share and turn on your PC all the
time. Below will show the installation procedure in Windows XP as an example.
Installation Procedure
Step 1: Enable Print Server function from the WEB GUI.
Figure 89: Print Server Configuration
Global Setting
Check to
Enable on-board print server
if you like to use this feature. Then enter
the Printer Name, Make and Model Name. The
Printer Name
can be any text
string up to 40 characters. The
Make and Model Name
can be any text string up
to 128 characters.
Click
Save/Apply
to save the configuration
Page 65 / 92
X5668 / X5668U
User’s Guide
60
Step 2: Click on Add a printer from Control Panel of WinXP computer and click
Next.
Figure 90: Printer and Faxes Configuration
Figure 91: Welcome to Add a Print Server
19216811.live