Page 56 / 92
Scroll up to view Page 51 - 55
X5668 / X5668U
User’s Guide
51
8
Diagnostic
The Diagnostic web page provides the connection check in physical layer and upper
layer. The result is helpful to figure out the problem if you have problem to surf
Internet.
Diagnostic
This page will show up the result of diagnostic in physical layer like WAN port and also
upper layer of PPP if ISP provides the PPP access protocol.
Figure 75: Diagnostic Result
Global Setting:
Click the
Connection
to test another connection if there are more than one PVC
are configured.
Click the
Test
to test it again
Click
Test with OAM F4
to verify the DSL link.
Page 57 / 92
X5668 / X5668U
User’s Guide
52
9
Management
The Management web page menu comprises:
Settings
System Log
TR-069 Client
Access Control
Update Software
Save/Reboot
Settings
This page allows you to backup the current configuration of the device, update the
configuration, and restore default configuration (factory setting).
Backup
Figure 76: Backup Settings
Click Backup Settings to backup the current settings of the device into file in PC.
Update
Figure 77: Restore Default Settings
Click
Browser
to specify the configuration file (settings) in PC and click
Update
Settings
to upload the settings to the device.
Page 58 / 92
X5668 / X5668U
User’s Guide
53
Restore Default
Figure 78: Restore Default Settings
Click Restore Default Settings to restore the factory default settings.
System Log
This page allows you to view system log and also configure system log that way you
want to see.
Figure 79: Management Configuration – System Log
Global Setting
Click
View System Log
to view system log
Click
Configure System Log
to configure the way you want to see
Figure 80: Management Configuration – Configure System Log
Page 59 / 92
X5668 / X5668U
User’s Guide
54
Global Setting
Select to
Enable Log
function or not
Select
Log Level
from the list
Select
Display Level
from the list
Select
Mode
from the list
Click
Save/Apply
to save the configuration.
TR-069 Client
This page allows you to access TR-069 ACS (Auto-Configuration Server). The ACS
can provision, configure, and diagnostic the device from remote site.
Figure 81: Management Configuration – Firmware Upgrade
Global Setting
Select to
Enable
or
Disable
to send
Inform
packet to ACS.
Enter the
Inform Interval
number of seconds. The Inform packet will be sent to
ACS periodically.
Enter the
ACS URL
to reach ACS
Enter the
ACS User Name
and
Password
Enter the
Connection Request User Name
and
Password
Click
Save/Apply
to save the configuration
Page 60 / 92
X5668 / X5668U
User’s Guide
55
Access Control
This submenu provides you local (LAN) or remote (WAN) access to the device. This
may help the IT support staff to configure the router locally or remotely.
Service
Figure 83: Management Configuration – Access Control: Service
Global Setting:
Specify the method by which you wish to access the router locally or remotely by
selecting it. The following are the methods available for local and remote access:
FTP
HTTP
ICMP (Ping)
SSH
TELNET
TFTP
Click
Save/Apply
to save the configuration.
IP Address
19216811.live