Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 236 / 429 Scroll up to view Page 231 - 235

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

Enabling Layer 2 Service Channels Between an OLT and

a GPON ONT (on the OLT CLI)

.

l

You have established the environment for logging in to the Web page for service

configuration and have successfully logged in to the Web page. For details, see

3.4.3

Locally Logging in to the Web Interface

.

l

A portable computer with the Wi-Fi function must be available.

Context

The Wi-Fi wireless access service includes the Layer 3 bridge Wi-Fi service and the Layer 3

route Wi-Fi service.

l

Layer 3 Wi-Fi service: Search for the SSID is performed on the PC. After the user passes

the verification, the PPPoE auto dialup is performed on the PC. The IP address is allocated

by the upper-layer BRAS. The ONT is connected to the OLT and then to the upper-layer

network in the Layer 3 mode to provide the high-speed Internet access service.

l

Layer 3 route Wi-Fi service: Search for the SSID is performed on the PC. After the user

passes the verification, the PPPoE auto dialup is performed on the PC. The ONT is

connected to the OLT and then to the upper-layer network in the Layer 3 mode to provide

the high-speed Internet access service.

Procedure

l

Layer 3 bridge Wi-Fi service

1.

Configure the Wi-Fi parameters.

(1)

In the navigation tree, choose

Wi-Fi

>

Wi-Fi Basic Configuration

.

(2)

Select

Enable Wireless

to enable the Wi-Fi function. Then, set the parameters

as follows:

–

SSID: ChinaNet-huawei

–

Authentication Mode: WPA Pre-Shared Key

–

Encryption Mode: TKIP&AES

–

WPA PreSharedKey: chinahuawei

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

228

Page 237 / 429

(3)

Click

Apply

to apply the configuration.

2.

Configure the parameters of the Layer 3 bridge WAN port.

(1)

In the navigation tree, choose

WAN

>

WAN Configuration

.

(2)

In the right pane, click

New

. In the dialog box that is displayed, configure

parameters of the WAN port as follows:

–

WAN Connection: Enable

–

Mode: Bridge

–

VLAN ID: 40 (The VLAN ID of the ONT must be the same as the user-side

VLAN ID configured on the OLT.)

–

802.1p: 1

–

Bridge Type: PPPoE_Bridged

–

Binding options: SSID1

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

229

Page 238 / 429

NOTE

When you use Wi-Fi access service in the PPPoE mode, if DHCP is used, you need to set

Bridge Type

to

IP_Bridged

and enable the DHCP relay function. For procedure details, see

4.3.3 DHCP Server Configuration

.

(3)

Click

Apply

to apply the configuration.

3.

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right

pane, click

Save Configuration

.

4.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

User

Status

is

Connected

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

230

Page 239 / 429

l

Layer 3 route Wi-Fi service

1.

Configure the Wi-Fi parameters.

(1)

In the navigation tree, choose

Wi-Fi

>

Wi-Fi Basic Configuration

.

(2)

Select

Enable Wireless

to enable the Wi-Fi function. Then, set the parameters

as follows:

–

SSID: ChinaNet-huawei

–

Authentication Mode: WPA Pre-Shared Key

–

Encryption Mode: TKIP&AES

–

WPA PreSharedKey: chinahuawei

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

231

Page 240 / 429

(3)

Click

Apply

to apply the configuration.

2.

Configure the parameters of the Layer 3 route WAN port.

(1)

In the navigation tree, choose

WAN

>

WAN Configuration

.

(2)

In the right pane, click

New

. In the dialog box that is displayed, configure the

parameters of the Layer 3 route WAN port as follows:

–

WAN Connection: Enable

–

Service List: INTERNET (For configuring the Internet access service,

INTERNET or a combination containing INTERNET needs to be selected.)

–

Mode: Route

–

VLAN ID: 40 (The VLAN ID of the ONT must be the same as the user-side

VLAN ID configured on the OLT.)

–

802.1p: 1

–

IP Acquisition Mode: PPPoE

–

NAT: Enable

–

User Name: iadtest@pppoe, Password: iadtest (The user name and password

must be the same as the user name and password configured on the BRAS.)

–

Binding options: SSID1

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

232

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share