1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8245T
    5. /
  5. 47
Page 231 / 429 Scroll up to view Page 226 - 230
Step 7
Check the registration status of the voice user.
In the navigation tree, choose
Status
>
VoIP Information
. In the right pane,
User Status
is
Up
.
----End
Result
l
User 1 with telephone number
88001234
can call user 2 with telephone number
88001235
, and the communication between them is normal. The communication is also
normal for user 2's calling user 1.
l
Check whether the voice communication between users using different ONTs is normal.
3.4.6 Configuring the H.248-based Voice Service on the Web Page
This topic provides an example of how to configure the H.248-based voice service on the Web
page.
Prerequisite
l
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
Enabling Layer 2 Service Channels Between an OLT and
a GPON ONT (on the OLT CLI)
.
l
You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see
3.4.3
Locally Logging in to the Web Interface
.
l
Two telephone sets must be available and each must be connected to ports TEL1 and TEL2
respectively on the ONT.
Context
NOTE
Some voice parameters cannot be configured on the Web page but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see
3.6.1 Operation Guide on
the XML Configuration File (on the Web Page)
.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
223
Page 232 / 429
Procedure
Step 1
Configure parameters of the voice WAN port.
1.
In the navigation tree, choose
WAN
>
WAN Configuration
.
2.
In the right pane, click
New
. In the dialog box that is displayed, configure parameters of
the WAN port as follows:
l
WAN Connection: Enable
l
Service List: VoIP (For configuring the VoIP service, VoIP or a combination containing
VoIP needs to be selected.)
l
Mode: Route
l
VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side VLAN ID
configured on the OLT.)
l
802.1p: 6
l
IP Acquisition Mode: DHCP
3.
Click
Apply
to apply the configuration.
Step 2
Configure the parameters of the H.248-based voice interface.
1.
In the navigation tree, choose
Voice
>
VoIP Interface Configuration
.
2.
In the right pane, configure the parameters of the H.248-based voice interface as follows
(other parameters use the default settings):
l
Set
MGC Address
below
Primary Server
to
200.200.200.200
.
l
MID Format: DomainName
l
MG Domain: 6877687714852901
l
Signaling Port: 1_VOIP_R_VID_20
l
Region: CN – China
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
224
Page 233 / 429
NOTE
l
The parameters of the H.248-based voice interface must be consistent with the corresponding
configuration on the media gateway controller (MGC).
l
If dual-homing is configured,
MGC Address
below
Secondary Server
must be configured.
l
MID Format
can be set to
Domain Name
,
IP
, or
Device
. If
MID Format
is set to
Domain Name
or
Device
, the setting must be consistent with the corresponding configuration on the MGC.
l
Domain Name
is ONT's domain name registered on the MGC. It is globally unique.
Domain
Name
in this example is ONT's SN.
l
If
Media Port
is empty, the parameter value is the same as
Signaling Port
. The media streams are
not isolated from signaling streams. If the upper-layer network requires isolation of media streams
from signaling streams, create different traffic streams for the media streams and signaling streams
on the OLT, create different WAN ports on the ONT, and bind the created WAN ports to
Media
Port
and
Signaling Port
.
l
Profile Index
can be set to
Default
,
BT
,
FT
,
KPN
,
PCCW
,
ZTE
, or
BELL
. Choose the value based
on the MGC type.
Profile Index
is set to
Default
(indicating interconnection with Huawei MGC) in
this example. If the settings do not meet requirements, configure
UserDefine
. For details about how
to configure this parameter, contact Huawei technical support.
3.
Click
Apply
to apply the configuration.
Step 3
Configure parameters of the H.248-based voice users.
1.
In the navigation tree, choose
Voice
>
VoIP User Configuration
.
2.
In the right pane, configure the parameters of voice user 1 as follows:
l
Line Name: A0
l
Associated POTS: 1 (binding port TEL1 on the ONT)
l
Select
Enable Line Name
to enable the voice user configuration.
3.
Click
Apply
to apply the configuration.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
225
Page 234 / 429
4.
In the right pane, click
New
to add voice user 2, and configure the parameters of voice user
2 as follows:
l
Line Name: A1
l
Associated POTS: 2 (binding port TEL2 on the ONT)
l
Select
Enable Line Name
to enable the voice user configuration.
5.
Click
Apply
to apply the configuration.
NOTE
l
The terminal IDs
A0
and
A1
must be consistent with the corresponding configuration on the MGC.
l
If
Associated POTS
is
1
, port TEL1 on the ONT is bound. If
Associated POTS
is
2
, port TEL2 on the ONT
is bound.
Step 4
Save the configuration.
Choose
System Tools
>
Configuration File
from the navigation tree. In the right pane, click
Save Configuration
.
Step 5
Restart the voice process.
In the navigation tree, choose
Status
>
VoIP Information
. In the right pane, click
Restart
VoIP
.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
226
Page 235 / 429
Step 6
Check the ONT connection status.
In the navigation tree, choose
Status
>
WAN Information
. In the right pane,
Status
is
Connected
and the obtained IP address is displayed at
IP
.
Step 7
Check the registration status of the voice user.
In the navigation tree, choose
Status
>
VoIP Information
. In the right pane,
User Status
is
Up
.
----End
Result
l
User 1 with telephone number
88001234
can call user 2 with telephone number
88001235
, and the communication between them is normal. The communication is also
normal for user 2's calling user 1.
NOTE
The termination IDs of line 1 and line 2 configured on the MGC correspond to telephone numbers
88001234
and
88001235
respectively.
l
Check whether the voice communication between users using different ONTs is normal.
3.4.7 Configuring the Wi-Fi Access Service on the Web Page
This topic provides an example of how to configure the Wi-Fi access service on the Web page.
EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON
Terminal
Service Manual
3 Configuration
Issue 01 (2011-10-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
227

Rate

3.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top