Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 226 / 429 Scroll up to view Page 221 - 225

3.

Click

Apply

to apply the configuration.

Step 3

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right pane, click

Save Configuration

.

Step 4

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

218

Page 227 / 429

----End

Result

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. After the dialup

is successfully performed, the user can access the Internet.

l

Layer 3 Internet access service: The PC is configured to obtain the IP addresses

automatically. After the PPPoE dialup is successfully performed on the ONT, the PC can

automatically obtain the IP addresses allocated by the ONT, and the user can access the

Internet.

3.4.5 Configuring the SIP-based Voice Service on the Web Page

This topic provides an example of how to configure the SIP-based voice service on the Web

page.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

Enabling Layer 2 Service Channels Between an OLT and

a GPON ONT (on the OLT CLI)

.

l

You have established the environment for logging in to the Web page for service

configuration and have successfully logged in to the Web page. For details, see

3.4.3

Locally Logging in to the Web Interface

.

l

Two telephone sets must be available and each must be connected to ports TEL1 and TEL2

respectively on the ONT.

Context

NOTE

Some voice parameters cannot be configured on the Web page but can be configured by importing an XML

configuration file. For details about how to import an XML configuration file, see

3.6.1 Operation Guide on

the XML Configuration File (on the Web Page)

.

Procedure

Step 1

Configure parameters of the voice WAN port.

1.

In the navigation tree, choose

WAN

>

WAN Configuration

.

2.

In the right pane, click

New

. In the dialog box that is displayed, configure parameters of

the WAN port as follows:

l

WAN Connection: Enable

l

Service List: VoIP (For configuring the VoIP service, VoIP or a combination containing

VoIP needs to be selected.)

l

Mode: Route

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

219

Page 228 / 429

l

VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side VLAN ID

configured on the OLT.)

l

802.1p: 6

l

IP Acquisition Mode: DHCP

3.

Click

Apply

to apply the configuration.

Step 2

Configure parameters of the SIP-based voice interface.

1.

In the navigation tree, choose

Voice

>

VoIP Interface Configuration

.

2.

In the right pane, configure parameters of the SIP-based voice interface as follows (other

parameters use the default settings):

l

Set

Proxy Server Address

below

Primary Server

to

200.200.200.200

.

l

Home Domain: softx3000.huawei.com

l

Signaling Port: 1_VOIP_R_VID_20

l

Region: CN – China

NOTE

l

The parameters of the SIP-based voice interface must be consistent with the corresponding

configuration on the softswitch.

l

If dual-homing is configured,

Proxy Server Address

below

Secondary Server

must be configured.

l

If

Signaling Port

is empty, the parameter value is the same as

Media Port

. If the upper-layer network

requires isolation of media streams from signaling streams, create different traffic streams for the

media streams and signaling streams on the OLT, create different WAN ports on the ONT, and bind

the created WAN ports to

Media Port

and

Signaling Port

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

220

Page 229 / 429

3.

Click

Apply

to apply the configuration.

Step 3

Configure parameters of the SIP-based voice users.

1.

In the navigation tree, choose

Voice

>

VoIP User Configuration

.

2.

In the right pane, configure parameters of voice user 1 as follows:

l

Register User Name: 80001234

l

Auth User Name: [email protected]

l

Password: iadtest1

l

Associated POTS: 1 (binding port TEL1 on the ONT)

l

Select

Enable

to enable the voice user configuration.

3.

Click

Apply

to apply the configuration.

4.

In the right pane, click

New

to add voice user 2, and configure parameters of voice user 2

as follows:

l

Register User Name: 80001235

l

Auth User Name: [email protected]

l

Password: iadtest2

l

Associated POTS: 2 (binding port TEL2 on the ONT)

l

Select

Enable

to enable the voice user configuration.

5.

Click

Apply

to apply the configuration.

NOTE

l

The parameters of the SIP-based voice user must be consistent with the corresponding configuration on the

softswitch.

l

If

Associated POTS

is

1

, port TEL1 on the ONT is bound. If

Associated POTS

is

2

, port TEL2 on the ONT

is bound.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

221

Page 230 / 429

Step 4

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right pane, click

Save Configuration

.

Step 5

Restart the voice process.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane, click

Restart

VoIP

.

Step 6

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

222

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share