Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 251 / 429 Scroll up to view Page 246 - 250

Step 6

Click

OK

after the configuration.

----End

Result

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. After the dialup

is successfully performed, the user can access the Internet.

l

Layer 3 Internet access service: The PC is configured to obtain the IP addresses

automatically. After the PPPoE dialup is successfully performed on the ONT, the PC can

automatically obtain the IP addresses allocated by the ONT, and the user can access the

Internet.

3.5.4 Configuring SIP-based Voice Service Through the U2560

This topic provides an example of how to configure the SIP-based voice service through the

U2560.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

Enabling Layer 2 Service Channels Between an OLT and

a GPON ONT (on the OLT CLI)

.

l

The ONT is auto discovered on the U2560. For details, see

Commissioning Interoperation

Between the U2560 and the ONT Through the Web Page

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

243

Page 252 / 429

l

Two telephone sets must be available and each must be connected to ports TEL1 and TEL2

respectively on the ONT.

Context

Every data change must be saved. You can click

Save

in a window to save data changes. If you

navigate to another node without saving data changes, a dialog box will be displayed prompting

you to save the data changes. In this case, click

YES

in the dialog box. New data will be

automatically applied to the ONTs after the data changes are saved.

CAUTION

When configuring services on the U2560, do not modify the WAN interface connecting the

U2560 and the ONT. Otherwise, the U2560 loses communication with the ONT.

Procedure

Step 1

Log in to the U2560 and choose

Subnet View

>

TR069 Subnet

from the navigation tree. In the

terminal list, right-click an ONT and choose

Tools

>

Configure in Real Time

from the shortcut

menu.

Step 2

In the

Configure in Real Time

dialog box, set

Root Node

to

Internet gateway device

.

Step 3

Configure the parameters of the voice WAN interface.

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the

navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANIPConnection

from the navigation tree. Click

Add

in the lower left part.

Choose

1

from the navigation tree. In the right pane, set the parameters as follows:

l

Set

Enable

to

1

, indicating that the WAN connection is enabled.

l

Set

Connection Type

to

IP_Routed

, indicating that the connection type of the WAN

interface is in routing mode.

l

Set

Addressing Type

to

DHCP

, indicating that the WAN interface obtains IP addresses

in DHCP mode.

l

Set

X_HW_SERVICELIST

to

VOIP

, indicating that the WAN interface provides the

VoIP access service.

l

Set

X_HW_VLAN

to

20

, indicating the VLAN ID of the WAN interface is 20.

l

Set

X_HW_PRI

to

6

, indicating that the priority level of the WAN interface is 6.

NOTE

l

If the WAN interface obtains IP addresses in static or DHCP mode, choose

WANIPConnection

to

set parameters of the voice WAN interface.

l

If the WAN interface obtains IP addresses in PPPoE mode, choose

WANPPPConnection

to set

parameters of the voice WAN interface.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

244

Page 253 / 429

Step 4

Configure the voice protocol parameters.

Choose

InternetGatewayDevice

>

Services

>

VoiceService

>

1

>

VoiceProfile

>

1

from the

navigation tree. In the right pane, set the parameters as follows:

l

Set

SignalingProtocol

to

SIP

, indicating that the SIP protocol is used.

l

Set

Region

to

CN

, indicating the country code of China.

l

Set

X_HW_PortName

to

wan2

, indicating that the new WAN interface 2 is bound.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

245

Page 254 / 429

Step 5

Configure the SIP service parameters.

Choose

InternetGatewayDevice

>

Services

>

VoiceService

>

1

>

VoiceProfile

>

1

>

SIP

from

the navigation tree. In the right pane, set the parameters as follows:

l

Set

ProxyServer

to

softx3000.huawei.com

, indicating that the address of the SIP proxy

server is

softx3000.huawei.com

.

l

Set

RegistarServer

to

200.200.200.200

, indicating that the SIP registration address is

200.200.200.200

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

246

Page 255 / 429

Step 6

Configure the information about SIP voice users.

1.

Choose

InternetGatewayDevice

>

Service

>

VoiceService

>

1

>

VoiceProfile

>

1

>

Line

>

1

from the navigation tree. In the right pane, set

DirectoryNumber

to

88001234

,

indicating that the telephone number of SIP user 1 is 88001234.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

247

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share