Page 111 / 134
Scroll up to view Page 106 - 110
103
Here are descriptions of every setup items:
Enable DMZ (1):
Check this box to enable DMZ function, uncheck this
box to disable DMZ function.
Public IP
You can select ‘Dynamic IP’ or ‘Static IP’ here.
address (2):
If you select ‘Dynamic IP’, you have to select an
Internet connection session from dropdown menu; if
you select ‘Static IP’, please input the IP address that
you want to map to a specific private IP address.
Client PC IP
Please input the private IP address that the
address (3):
Internet IP address will be mapped to.
Computer Name (4):
Pull down the menu and all the computers connected to
the Smart Repeater will be listed here. You can easily to
select the computer name without checking the IP
address of the computer.
1
2
4
5
6
7
8
9
10
11
3
Page 112 / 134
104
Add (5):
Click ‘Add’ button to add the public IP address and
associated private IP address to the DMZ table.
Reset (6):
Click ‘Clear’ to remove the value you inputted in Public
IP address and Client PC IP address field.
Current
All existing public IP address and private IP
DMZ table (7):
address mapping will be displayed here.
Delete
If you want to delete a specific DMZ entry, check
Selected (8):
the ‘select’ box of the DMZ entry you want to delete,
then click ‘Delete Selected’ button. (You can select
more than one DMZ entries).
Delete All (9):
If you want to delete all DMZ entries listed here, please
click ‘Delete All’ button.
Reset (10):
You can also click ‘Reset’ button to unselect all DMZ
entries.
After you finish with all settings, please click ‘Apply’ (11) button and the
following message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
Page 113 / 134
105
3-4 System Status
The functions described here will provide you with system related information.
To enter system status menu, please either click ‘Status’ link located at the
upper-right corner of web management interface, or click ‘Status’ button in
main menu.
3-4-1 System information and firmware version
You can use this function to know the system information and firmware version
of this Smart Repeater.
Please click ‘Status’ link located at the upper-right corner of web management
interface, and the following message will be displayed on your web browser
3-4-2 Internet Connection Status
You can use this function to view the status of your current Internet connection.
Please click ‘Status’ menu at the top of web management interface, then select
‘Internet Connection’ from the left hand menu and the following message will
be displayed:
NOTE: Information displayed here may vary.
Page 114 / 134
106
This information will vary depending on the connection status and the type of
internet connection that you are using.
It will provide IP information, the
Internet connection mode (i.e. wired or wireless) as well as the details of a
wireless connection.
3-4-3 Home Network
The Home Network status page displays information regarding your local
wireless home network and your wired home network.
It will display the SSId
of your home wireless network as well as the LAN IP settings of your home
wired network.
This information will vary depending on the device status.
Page 115 / 134
107
3-4-4 System Log
Important system events are logged here. You can use this function to check
the event log of your Smart Repeater.
Please click ‘System Log’ tab at the top of web management interface, and the
following will be displayed on your web browser:
The system events will be displayed in this page, and here are descriptions of
every buttons:
Save (1):
Save current event log to a text file.
Clear (2):
Delete all event logs displayed here.
Refresh (3):
Refresh the event log display.
1
2
3
19216811.live