1. Home
    2. /
  2. Manuals
    3. /
  3. Hawking
    4. /
  4. HW2R1
    5. /
  5. 25
Page 121 / 134 Scroll up to view Page 116 - 120
113
Hawking Technologies website, and use it to upgrade your Smart Repeater.
After a firmware upgrade file is selected, click ‘Apply’ button, and the Smart
Repeater will start firmware upgrade procedure automatically. The procedure
may take several minutes, please be patient.
3-7 System Reset
If you think you network performance is bad, or you find the behavior of the
Smart Repeater is strange, you can perform a Smart Repeater reset.
Sometimes it will solve the problem.
To do so, please click ‘Admin’ tab located at the upper-right corner of web
management interface, then click ‘Reset’. The following message will be
displayed on your web browser:
Please click ‘Apply’ to reset your Smart Repeater, and it will be available again
after a few minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web
browser or physically disconnect your computer from Smart
Repeater. If the firmware you uploaded is corrupt, the firmware
upgrade will fail, and you may have to return this Smart Repeater to
the dealer of purchase to ask for help. (Warranty is void if you
Page 122 / 134
114
3-8 Using the Support Utility
The Smart Repeater Support Utility is used to help trouble shoot a connection
or easily access the basic configuration settings of the HW2R1 without having
to log into the web interface.
This Utility may often be used in conjunction
with support calls from our support department or by the user when on site or
for quick configuration purposes.
To install the Support Utility, insert the included CD and click on Support Utility
to install the Utility.
Page 123 / 134
115
After your Utility is installed, click on the Support Utility icon on your desktop to
open the program.
Click on SCAN to locate the Smart Repeater you wish to
configure.
Once selected click ‘CONNECT’ to connect to the Repeater.
Note: before making any configurations on the Utility, you MUST be connected
to a Repeater.
The status of the Utility and Repeater connection is displayed
on the bottom left corner.
Page 124 / 134
116
The Repeater Settings tab provides information on all current settings for the
local network (LAN) as well as the Internet network (WAN).
The firmware
version and MAC Address are listed as well.
The IP Address (LAN) tab allows you to enable or disable DHCP (automatic IP
assignment to clients connecting to the HW2R1) as well as make adjustments
to the local IP Address of the Repeater.
Page 125 / 134
117
The Wireless Internet Connection tab allows you to see the current Internet
(WAN) settings for the Repeater.
From here you can also scan for other
wireless networks detected by the Repeater and highlight them to change your
Internet Connection source to begin repeating from a new wireless network.
If the network you are trying to connect to uses encryption it will be required
that you enter the Security Key in the field below.
Firmware Upgrade: Simply browse for the latest firmware file and click Apply to
upload the firmware of your Repeater.

Rate

4.5 / 5 based on 2 votes.

Popular Hawking Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top