Page 96 / 134
Scroll up to view Page 91 - 95
88
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer
communications, with this function, network devices will be able to
communicate with other devices directly, and learn about information about
other devices. Many network device and applications rely on UPnP function
nowadays.
Please click ‘Apps and Gaming’ at top of web management interface, then click
‘UPnP’, and the following message will be displayed on your web browser:
There is only one option in this page, please select ‘Enable’ or ‘Disable’ to
enable or disable UPnP function, then click ‘Apply’ button, and the following
message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
Page 97 / 134
89
3-2-6 ALG Settings
Application Layer Gateway (ALG) is a special function of this Smart Repeater.
It includes many preset routing rules for numerous applications which require
special support. With these supports, those applications which required special
support will be able to work with NAT architecture.
Please click ‘Apps and Gaming’ tab at the top of web management interface,
then click ‘ALG Settings’, and the following message will be displayed on your
web browser:
There are many applications listed here. Please check the box of the special
support for applications you need, and then click ‘Apply’ button and the
Page 98 / 134
90
following message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
Page 99 / 134
91
3-3 Firewall
Besides NAT, this Smart Repeater also provides firewall function to block
malicious intruders from accessing your computers on local network. These
functions include inbound attack prevention, and block outbound traffics, like
block URLs which have pre-defined keywords.
Please follow instructions to enable or disable firewall function:
Please click ‘Security’ tab at top of web management interface, and the
following message will be displayed on your web browser:
Please select ‘Enable’ or ‘Disable’ to enable or disable firewall function of this
Smart Repeater, the click ‘Apply’ button, and the following message will be
displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
Page 100 / 134
92
3-3-1 Access Control
This function allows or denies computers with specific MAC address from
connecting to the network; it can also allow or deny computers with specific IP
address, protocol, or port.
Please click ‘Security’ tab at the top of web management interface, then click
‘Access Control’, and the following message will be displayed on your web
browser:
Here are descriptions of every setup items:
Enable MAC
Check this box to enable MAC address based
Filtering (1):
filtering, and please select ‘Deny’ or ‘Allow’ to decide the
behavior of MAC filtering table. If you select deny, all
MAC addresses listed in filtering table will be denied
from connecting to the network; if you select allow, only
MAC addresses listed in filtering table will be able to
connect to the network, and rejecting all other network devices.
1
2
3
5
6
7
8
9
10
11
13
14
15
16
4
12
19216811.live