Hawking HW2R1 Router Manual PDF (Setup & Configuration Guide)

Page 91 / 134 Scroll up to view Page 86 - 90

83

3-2-3 Virtual Server

This function allows you to redirect a port on Internet IP address (on WAN port)

to a specified port of an IP address on the local network. This allows you to

setup an Internet service on the computer on the local network, without

exposing it on the Internet directly. You can also build many sets of port

redirection to provide many different Internet services on different local

computers via a single Internet IP address.

Please click ‘Apps and Gaming’ on top of web management interface, then

click ‘Virtual Server’, and the following message will be displayed on your web

browser:

Here are descriptions of every setup items:

Enable Virtual

Check this box to enable virtual server,

Server (1):

and uncheck this box to disable virtual server.

Private IP (2):

Input the IP address of the computer which

provides Internet service.

1

2

3

4

5

8

9

10

11

12

13

14

7

6

Page 92 / 134

84

Computer Name (3):

Pull down the menu and all the computers connected to

the Smart Repeater will be listed here. You can easily to

select the computer name without checking the IP

address of the computer.

Private Port (4):

Input the port number of the IP address

which provides Internet service.

Type (5):

Select the type of connection, TCP or UDP. If you’re not

sure, please select ‘Both’.

Public Port (6):

Please select the port number of Internet IP address

which will be redirected to the port number of local IP

address defined above.

Comment (7):

Please input any text to describe this mapping, up to 16

alphanumerical characters.

Add (8):

Add the mapping to virtual server table.

Reset (9):

Remove all inputted values.

Virtual Server

All existing virtual server mappings will be

Table (10):

displayed here.

Delete

Please select a virtual server mapping by clicking

Selected (11):

the ‘Select’ box of the mapping, then click ‘Delete

Selected’ button to remove the mapping. If there’s no

existing mapping, this button will be grayed out.

Delete All (12):

Delete all mappings existed in virtual server table.

Reset (13):

Unselect all mappings.

After you finish with all settings, please click ‘Apply’ (14) button and the

following message will be displayed on your web browser:

Page 93 / 134

85

Press ‘Go Back to save the settings made and go back to the web

management interface; press ‘Apply’ to save the settings made and restart the

Smart Repeater so the settings will take effect after it reboots.

3-2-4 Port Mapping for Special Applications

Some applications require more than one connection at a time; these

applications won’t work with simple NAT rules. In order to make these

applications work, you can use this function to let these applications work. Go

to ‘Apps and Gaming’ and click ‘Special Applications’.

1

2

3

4

5

8

9

10

11

12

7

6

13

14

Page 94 / 134

86

Here are descriptions of every setup items:

Enable (1):

Check this box to enable special applications and

uncheck this box to disable virtual server.

IP Address (2):

Input the IP address of the computer which you want to

open the ports.

Computer Name (3):

Pull down the menu and all the computers connected to

the Smart Repeater will be listed here. You can easily to

select the computer name without checking the IP

address of the computer.

TCP Port to Open (4): This is the out going (Outbound) range of TCP port

numbers for this particular application.

UDP Port to Open (5): This is the out going (Outbound) range of UDP port

numbers for this particular application.

Comment (6):

The description of this setting.

Pop. Applications

This section lists the more popular applications that (7):

require multiple connections. Select an application

from the Popular Applications selection and click ‘Add’

to save the setting to ‘Current Trigger-Port Table.’

Add (8):

Add the setting to the ‘Current Trigger-Port Table.’

Reset (9):

Click ‘Reset’ will clear all above setting and you can set

up again.

Page 95 / 134

87

Current Trigger-Port All the settings for the special applications will be

(10):

listed here. If you want to remove some Special

Application settings from the " Current Trigger-Port

Table", select the Special Application settings you want

to remove in the table and then click "Delete Selected".

If you want remove all Special Appliacation settings

from the table, just click "Delete All" button. Click

"Reset" will clear your current selections.

Delete

Please select a special application by clicking

Selected (11):

the ‘Select’ box of the mapping, then click ‘Delete

Selected’ button to remove the setting. If there’s no

setting here, this button will be grayed out.

Delete All (12):

Delete all settings existed in trigger port table.

Reset (13):

Unselect all settings.

Note: Only one LAN client can use a particular special application at a time.

After you finish with all settings, please click ‘Apply’ (14) button and the

following message will be displayed on your web browser:

Press ‘Go Back to save the settings made and go back to the web

management interface; press ‘Apply’ to save the settings made and restart the

Smart Repeater so the settings will take effect after it reboots.

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share