Page 41 / 96 Scroll up to view Page 36 - 40
³1
D-Link DWL-7100AP User Manual
Current IP Mapping List
This screen displays information about the current DHCP dynamic and static IP address pools. This information is available when you
enable the DHCP function of the DWL-7100AP and assign dynamic and static IP address pools.
These are IP address pools to which the
DHCP server function has assigned dynamic IP
addresses.
The MAC address of a device on the network that
is within the DHCP dynamic IP address pool.
The current corresponding DHCP-assigned
dynamic IP address of the device.
The length of time that the dynamic IP address
will be valid.
These are IP address pools to which the
DHCP server function has assigned static IP
addresses.
The MAC address of a device on the network that
is within the DHCP static IP address pool.
The current corresponding DHCP-assigned static
IP address of the device.
Current DHCP
Dynamic Pools:
Binding MAC
address:
Assigned IP
address:
Lease Time:
Current DHCP
Static Pools:
Binding MAC
address:
Assigned IP
address:
Page 42 / 96
³±
D-Link DWL-7100AP User Manual
Admin Settings
User Name:
Old Password:
New Password:
Enter a user name. The default setting is admin.
Enter the current password (blank by default).
Enter a new password and enter it again in the
Confirm Password box.
Page 43 / 96
³²
D-Link DWL-7100AP User Manual
System Settings
Apply Settings and
Restart:
Restore to Factory
Default Settings:
Click
Restart
to apply the system settings and
restart the DWL-7100AP.
Click
Restore
to return the DWL-7100AP to its
factory default settings.
Page 44 / 96
³³
D-Link DWL-7100AP User Manual
Update File:
After you have downloaded the most recent
version of the firmware from http://support.dlink.
com to your hard drive, you can
Browse
your hard
drive to locate the downloaded file. Select the file
and click
OK
to update the firmware.
Upgrade Firmware
Page 45 / 96
³´
D-Link DWL-7100AP User Manual
Update File:
Load Settings to the
Loacl Hard Drive:
Browse for the configuration settings that you have
saved to your hard drive. Click
OK
after you have
selected the settings file.
Click
OK
to save the selected settings to your
hard drive.
Configuration File

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top