±µ

D-Link DWL-7100AP User Manual

AP Repeater (WEP)

Select

Disabled

or

Enabled

. (

Disabled

is selected

here).

Select

HEX

or

ASCII.

Select

64-bit, 128-bit,

or

152-bit.

Select the

1st

through the

4th

key to be the active

key.

Input up to four keys for encryption. You will select

one of these keys in the valid key field.

Encryption:

Key Type:

Key Size:

Valid Key:

First through Fourth

keys:

*

Hexadecimal

digits consist of the numbers 0-9 and the letters A-F.

ASCII

(American Standard Code for Information Interchange) is a code for

representing English letters as numbers 0-127.

±7

D-Link DWL-7100AP User Manual

AP Client

Select

IEEE802.11a

or

IEEE802.11g

.

Select

AP Client

from the drop-down menu.

Select Enable to broadcast your SSID over the

wireless network. Select Disable to hide your

SSID.

The channel used will be displayed. The channel

will follow the root AP.

This feature is not available in Repeater mode.

Click on

Scan

and select the root AP you with to

repeat. When you select the AP, the MAC Address

and the SSID fields will populate.

Select

Open System

to communicate the key

across the network.

Select

Shared Key

to limit communication to

only those devices that share the same WEP

settings.

Select

WPA-PSK

or

WPA2-PSK

to secure your

network using a password and dynamic key

changes (No RADIUS server required).

Disabled by default. You can select

Super G

without Turbo

or

Super G with Dynamic

Turbo

.

Wireless Band:

Mode:

SSID Broadcast:

Channel:

Auto Channel Scan:

Root AP MAC

Address/SSID:

Authentication:

Super G Mode:

±¶

D-Link DWL-7100AP User Manual

AP Client (WEP)

Select

Disabled

or

Enabled

. (

Disabled

is selected

here).

Select

HEX

or

ASCII.

Select

64-bit, 128-bit,

or

152-bit.

Select the

1st

through the

4th

key to be the active

key.

Input up to four keys for encryption. You will select

one of these keys in the valid key field.

Encryption:

Key Type:

Key Size:

Valid Key:

First through Fourth

keys:

*

Hexadecimal

digits consist of the numbers 0-9 and the letters A-F.

ASCII

(American Standard Code for Information Interchange) is a code for

representing English letters as numbers 0-127.

±·

D-Link DWL-7100AP User Manual

AP Client (WPA-PSK/WPA2-PSK)

When you select

WPA-PSK

,

WPA2-PSK

, or

WPA-Auto-PSK

you must select

AES

or

TKIP

from the drop-down menu.

Select the interval during which the group

key will be valid. The default value of 1800 is

recommended.

Enter a passphrase. The passphrase is an

alpha-numeric password between 8 and 63

characters long. The password can include

symbols (!?*&_) and spaces. Make sure you

enter this key exactly the same on all other

wireless clients.

Cipher Type:

Group Key Update

Interval:

PassPhrase:

²0

D-Link DWL-7100AP User Manual

LAN Settings

Static IP Address

Static (Manual) is chosen here. Choose this option

if you do not have a DHCP server in your network,

or if you wish to assign a static IP address to the

DWL-7100AP.

The default IP address is 192.168.0.50. Assign

a static IP address that is within the IP address

range of your network.

Enter the subnet mask. All devices in the network

must share the same subnet mask..

Enter the IP address of the gateway in your

network. If there isn’t a gateway in your network,

please enter an IP address within the range of

your network.

Get IP From:

IP Address:

Subnet Mask:

Default Gateway:

LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the

DWL-7100AP. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address

is private to your internal network and cannot be seen on the Internet.