Page 36 / 96
Scroll up to view Page 31 - 35
²µ
D-Link DWL-7100AP User Manual
Grouping
Load Balance:
User Limit:
Link Integrate:
Ethernet
Link
Status:
Load Balancing allows you to balance and
share the wireless network traffic and clients
using multiple DWL-7100APs. Select Enable or
Disable.
Sets the maximum amount of users allowed
(0-64).
If the Ethernet connection between the LAN
and the DWL-7100AP is disconnected, the Link
Integrate option will cause the wireless segment
associated with the AP to be disconnected from
the AP. Select
Enable
or
Disable
.
Displays the status of the Ethernet connection.
Page 37 / 96
²7
D-Link DWL-7100AP User Manual
DHCP Server
Dynamic Pool Settings
DHCP Server
Control:
IP Assigned From:
The Range of Pool
(1-255):
SubMask:
Gateway:
Wins:
DNS:
Dynamic Host Configuration Protocol
assigns
dynamic IP addresses to devices on the network.
This protocol simplifies network management
and allows new wireless devices to receive IP
addresses automatically without the need to
manually assign new IP addresses.
Select
Enable
to allow the DWL-7100AP to
function as a DHCP server.
Input the first IP address available for assignment
in your network.
Enter the number of IP addresses available for
assignment.
All devices in the network must have the same
subnet mask to communicate. Enter the submask
for the network here.
Enter the IP address of the gateway on the
network.
Enter the number of IP addresses available for
assignment.
All devices in the network must have the same
subnet mask to communicate. Enter the submask
for the network here.
Page 38 / 96
²¶
D-Link DWL-7100AP User Manual
Domain Name:
Lease Time :
Status:
Enter the domain name of the DWL-7100AP, if applicable. (An example of a domain name is: www.dlink.com.)
The Lease Time is the period of time before the DHCP server will assign new IP addresses.
Turn the
Dynamic Pool Settings ON
or
OFF
here.
Page 39 / 96
²·
D-Link DWL-7100AP User Manual
Static Pool Settings
DHCP Server Control:
Assigned IP:
Assigned MAC
Address:
SubMask:
Gateway:
Dynamic Host Configuration Protocol
assigns
IP addresses to wireless devices on the network.
This protocol simplifies network management
and allows new wireless devices to receive IP
addresses automatically without the need to
manually assign IP addresses.
Select
Enable
to allow the DWL-7100AP to
function as a DHCP server.
Use the
Static Pool Settings
to assign the same
IP address to a device at every restart. The IP
addresses assigned in the Static Pool
list must
NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address
to a device via its MAC address, click
Apply
; the
device will appear in the
Assigned Static Pool
at
the bottom of the screen. Edit or delete the device
in this list.
Enter the MAC address of the device here.
Enter the subnet mask here.
Enter the IP address of the gateway on the
network.
Page 40 / 96
³0
D-Link DWL-7100AP User Manual
Wins:
DNS:
Domain Name:
Status:
Windows Internet Naming Service
is a system that determines the IP address of a network computer with a
dynamically assigned IP address, if applicable.
Enter the IP address of the Domain Name Server, if applicable. The DNS translates domain names such as www.
dlink.com into IP addresses.
Enter the domain name of the DWL-7100AP, if applicable.
This option turns the Static Pool settings
ON
or
OFF
.
19216811.live