Page 21 / 96
Scroll up to view Page 16 - 20
±1
D-Link DWL-7100AP User Manual
WDS with AP (WEP)
Select
Disabled
or
Enabled
. (
Disabled
is selected
here).
Select
HEX
or
ASCII.
Select
64-bit, 128-bit,
or
152-bit.
Select the
1st
through the
4th
key to be the active
key.
Input up to four keys for encryption. You will select
one of these keys in the valid key field.
Encryption:
Key Type:
Key Size:
Valid Key:
First through Fourth
keys:
*
Hexadecimal
digits consist of the numbers 0-9 and the letters A-F.
ASCII
(American Standard Code for Information Interchange) is a code for
representing English letters as numbers 0-127.
Page 22 / 96
±±
D-Link DWL-7100AP User Manual
WDS
Select
IEEE 802.11g
or
IEEE 802.11a
.
WDS
is selected from the drop-down menu.
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID’s factory default
setting is
dlink
. The SSID can be easily changed
to connect to an existing wireles network, or to
establish a new wireless network.
Wireless Band:
Mode:
SSID:
In WDS, the
DWL-7100AP
wirelessly connects multiple networks, without functioning as a wireless AP.
Enable or Disable SSID broadcast. Enabling this
feature broadcasts the SSID across the network.
All devices on the network must share the same
channel.
Note:
The wireless adapters will automatically scan
and match the wireless setting.
This option is unavailable in WDS.
Enter the MAC addresses of the APs in your
network that will serve as bridges to wirelessly
connect multiple networks.
SSID Broadcast:
Channel:
Auto Channel Scan:
Remote AP MAC
Address:
Page 23 / 96
±²
D-Link DWL-7100AP User Manual
Authentication:
Select
Open System
to communicate the key across the network.
Select
Shared Key
to limit communication to only those devices that share the same WEP settings.
Select
Open System/Shared Key
to allow either form of data encryption.
Select
WPA-PSK
,
WPA2-PSK
, or
WPA-Auto-PSK
to secure your network using a password and dynamic key changes
(No RADIUS server required).
Page 24 / 96
±³
D-Link DWL-7100AP User Manual
WDS (WEP)
Select
IEEE802.11a
or
IEEE802.11g
.
Select
Disabled
or
Enabled
. (
Disabled
is selected
here).
Select
HEX
or
ASCII.
Select
64-bit, 128-bit,
or
152-bit.
Select the
1st
through the
4th
key to be the active
key.
Input up to four keys for encryption. You will select
one of these keys in the valid key field.
Wireless Band:
Encryption:
Key Type:
Key Size:
Valid Key:
First through Fourth
keys:
*
Hexadecimal
digits consist of the numbers 0-9 and the letters A-F.
ASCII
(American Standard Code for Information Interchange) is a code for
representing English letters as numbers 0-127.
Page 25 / 96
±´
D-Link DWL-7100AP User Manual
AP Repeater
Select
IEEE802.11a
or
IEEE802.11g
.
Select
AP Repeater
from the drop-down menu.
Select
Enable
to broadcast your SSID over the
wireless network. Select
Disable
to hide your
SSID.
The channel used will be displayed. The channel
will follow the root AP.
This feature is not available in Repeater mode.
Click on Scan and select the root AP you with to
repeat. When you select the AP, the MAC Address
and the SSID fields will populate.
Select
Open System
or
Shared Key
. Refer to
the next page.
Disabled by default. You can select
Enable
if the
access point you are connecting to is using Super
G or A mode.
Wireless Band:
Mode:
SSID Broadcast:
Channel:
Auto Channel Scan:
Root AP MAC Address/
SSID:
Authentication:
Super G Mode/Super A
Mode:
19216811.live