D-Link DWL-7100AP Router Manual PDF (Setup & Configuration Guide)

Page 31 / 96 Scroll up to view Page 26 - 30

²1

D-Link DWL-7100AP User Manual

Get IP From:

IP Address:

Subnet Mask:

Default Gateway:

Dynamic (DHCP) is chosen here. Choose Dynamic

IP Address to obtain an IP Address automatically

from a DHCP server in your network.

This ﬁeld is unavailable when DHCP is chosen.

Dynamic IP Address

Page 32 / 96

²±

D-Link DWL-7100AP User Manual

Advanced Performance Settings

Wireless Band:

Auto Channel Select:

Data Rate:

Beacon Interval:

DTIM:

Fragment Length:

RTS Length:

Select

IEEE802.11a

or

IEEE802.11g

.

When enabled, the access point will scan for the

best channel automatically.

Select the speed or data rate. Select

Auto

for

best results.

Beacons are packets sent by an access point to

synchronize a network. Specify a beacon interval

value. The default (100) is recommended.

(Delivery Trafﬁc Indication Message) -

Select a

setting between 1 and 255.

1

is the default setting.

DTIM is a countdown informing clients of the next

window for listening to broadcast and multicast

messages.

The fragmentation threshold, which is speciﬁed

in bytes, determines whether packets will be

fragmented. Packets exceeding the 2346 byte

setting will be fragmented before transmission.

2346 is the default setting.

This value should remain at its default setting of

2346. If you encounter inconsistent data ﬂow, only

minor modiﬁcations to the value range between

256 and 2346 are recommended.

Page 33 / 96

²²

D-Link DWL-7100AP User Manual

Transmit Power:

Super Mode:

Radio Wave:

Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power.

Select

Disable

or

Enable

from the drop-down menu.

Select

ON

or

OFF

.

Page 34 / 96

²³

D-Link DWL-7100AP User Manual

Filters

Wireless Access Settings

Wireless Band:

Access Control:

MAC Address:

MAC Address List:

Select

IEEE802.11g

or

IEEE802.11a

.

Enter the MAC addresses that you wish to include

in your ﬁlters list, and click

Save

.

When you enter a MAC address, it appears in this

list. Click

Delete

next to a MAC address to remove

it from the list.

Select

Disabled

to disable the ﬁlters function.

Select

Accept

to accept only those devices with

MAC addresses in the Access Control List.

Select

Reject

to reject the devices with MAC

addresses in the Access Control List.

Page 35 / 96

²´

D-Link DWL-7100AP User Manual

WLAN Partition

Wireless Band:

Internal Station

Connection:

Ethernet to WLAN

Access:

Select

IEEE802.11g

or

IEEE802.11a

.

Enabling this feature allows wireless clients to

communicate with each other. If this is disabled,

wireless stations of the selected band are not

allowed to exchange data through the access

point.

Enabling this feature allows Ethernet devices

to communicate with wireless clients. If this is

disabled, all data from the Ethernet to associated

wireless devices is blocked. Wireless devices can

still send data to the Ethernet.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share