Page 61 / 96
Scroll up to view Page 56 - 60
µ1
D-Link DWL-7100AP User Manual
WPA-EAP/WPA2-EAP/ WPA-Auto-EAP
Cipher Type:
Select
Auto, TKIP
, or
AES
from the drop-down
menu.
Select the interval during which the group key will
be valid. 1800 is the recommended setting. A lower
interval may reduce transfer rates.
Enter a PassPhrase between 8-63 characters in
length.
Group Key Update
Interval:
PassPhrase:
Page 62 / 96
µ±
D-Link DWL-7100AP User Manual
Filters
Enabling this allows wireless clients to communicate
with each other. When this option is disabled,
wireless stations are not allowed to exchange data
through the access point.
Enabling this option allows Ethernet devices to
communicate with wireless clients. When this
option is disabled, all data from Ethernet to
wireless clients is blocked. Wireless devices can
still send data to the Ethernet devices when this
is disabled.
When disabled access control is not filtered
based on the MAC address. If Accept or Reject
is selected, then a box appears for entering MAC
addresses. When
Accept
is selected, only devices
with a MAC address in the list are granted access.
When
Reject
is selected, devices in the list of MAC
addresses are not granted access.
Add
or
Delete
MAC addresses in the Access
Control List.
Internal Station
Connection:
Broadcast from
Ethernet to WLAN:
Access Control:
Access Control List:
Page 63 / 96
µ²
D-Link DWL-7100AP User Manual
AP Mode
There are 5 AP modes that are configurable in
IEEE802.11g:
•
Access Point
•
WDS with AP
•
WDS
• AP Repeater
• AP Client
Access Point, the default setting used to create a
wireless LAN, is displayed here.
Please see the following pages for an explanation
of the other 4 AP modes.
Access Point:
Page 64 / 96
µ³
D-Link DWL-7100AP User Manual
WDS with AP
Allows you to connect multiple wireless LANs
together while acting as an access point at the same
time. This only works with other DWL-7100APs. If
enabled, you must enter the MAC address of the
other DWL-7100AP(s) on your network.
WDS with AP:
Page 65 / 96
µ´
D-Link DWL-7100AP User Manual
WDS
Allows you to connect multiple wireless LANs together.
All other LANs must be using DWL-7100APs. When
enabled, you must enter the MAC address of the
other DWL-7100AP(s) on your network (you can
enter up to eight addresses).
WDS:
19216811.live