Page 71 / 96
Scroll up to view Page 66 - 70
71
D-Link DWL-7100AP User Manual
Configuration Files
The DWL-7100AP allows you to save the device settings to a configuration file. To save a configuration file follow these steps:
Select a device from the Device List on the main screen of the AP Manager.
Click the device configuration button.
Click the
Save
button after you have all the settings as you want them.
A popup window will appear prompting you for a file name and location. Enter the file name, choose a file destination, and click
Save
.
Device Configuration button.
Note:
You must always click
Apply
in the Configuration window if you want the settings to take effect.
Page 72 / 96
7±
D-Link DWL-7100AP User Manual
To upgrade the firmware:
Click on the firmware button as shown above.
A popup window will appear. Locate the firmware upgrade file and click
Open
.
You can upgrade the firmware by clicking on this button after selecting the device(s).
Firmware
IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE FIRMWARE IS BEING UPGRADED.
Page 73 / 96
7²
D-Link DWL-7100AP User Manual
You can customize the basic System Settings for the DWL-7100AP by clicking on this button.
System Settings
Access Password
: This sets the admin password for the select device(s).
Auto Refresh
: This setting allows you to enable auto refreshing of the network device list. By default this option is disabled. If you choose
to enable it, you must
enter the refresh interval in seconds. All other settings on this screen should be left at the default setting.
Page 74 / 96
7³
D-Link DWL-7100AP User Manual
Setup Wizard
This button will launch the Setup Wizard that will guide you through device configuration.
Click
Next.
Page 75 / 96
7´
D-Link DWL-7100AP User Manual
Enter a
Password
and retype it in the V
erify Password
field.
Click
Next
.
Enter the
SSID
and the
Channel
for the IEEE network.
Auto Channel Scan is enabled by default. The access point will scan
for the best available channel.
Click
Next
.
19216811.live